sodcalculator

10 Tech How-To

Read & Write NFC Tags on iPhone in iOS 13

Guide 10-54695 · Updated · Step by step

This guide shows you how to read and write NFC tags using an iPhone running iOS 13. You’ll learn the built-in reading method, how to use the Shortcuts app for writing, and what to do when tags don’t respond. Before starting, make sure your iPhone is an iPhone 7 or newer (iPhone XS, XR, and later can also read tags in the background), and that NFC is enabled in Settings > Control Center > Customize Controls.

What You’ll Need

  • An iPhone 7 or later with iOS 13 installed
  • One or more blank NFC tags (NTAG213, NTAG215, NTAG216, or similar)
  • The Shortcuts app (pre-installed on iOS 13)
  • An NFC-writing app from the App Store if you want to write URLs or text directly (the built-in Shortcuts method has limitations)

Step-by-Step

Reading an NFC Tag

  1. Unlock your iPhone and make sure the screen is on. Reading works from the lock screen or home screen.
  2. Hold the top of your iPhone (the area near the rear camera) close to the NFC tag. Keep it within about 1–2 centimeters.
  3. Wait for a notification. On iPhone XS, XR, and later, a notification will appear automatically when the tag is detected. On iPhone 7, 8, and X, you need to open Control Center and tap the NFC scan button (the one that looks like a wave).
  4. Tap the notification to open the content. If the tag contains a URL, it will open in Safari. If it contains text, it will show in a popup.

Writing an NFC Tag Using Shortcuts

  1. Open the Shortcuts app on your iPhone.
  2. Tap the “+” in the top right corner to create a new shortcut.
  3. Tap “Add Action” and search for “NFC”.
  4. Select “NFC Tag” from the list. This action can read or write a tag.
  5. Tap “Scan” next to “NFC Tag” and hold your iPhone near the blank tag. The tag will be saved to the shortcut.
  6. Tap the “NFC Tag” action again and change it from “Read” to “Write”.
  7. Enter the content you want to write – a URL, a phone number, or text. For a URL, type the full address like https://example.com.
  8. Tap “Done” to save the shortcut.
  9. Run the shortcut by tapping it in the Shortcuts app. Hold your iPhone near the tag again when prompted. The tag will be written.

Writing an NFC Tag Using a Third-Party App

  1. Download an NFC writer app from the App Store (search for “NFC writer” – popular options include NFC Tools and NFC TagWriter by NXP).
  2. Open the app and select “Write” or “Add a record”.
  3. Choose the data type – URL, text, contact, or Wi-Fi credentials.
  4. Enter the data and tap “Write” or “OK”.
  5. Hold your iPhone near the blank tag. The app will show a success message when done.

Common Mistakes

  • Using an iPhone 7/8/X without opening Control Center – these models require the manual NFC scan button; they don’t scan automatically.
  • Holding the phone too far away – NFC has a very short range. You need to almost touch the tag with the top of the phone.
  • Writing to a read-only tag – many tags come pre-locked. Check the tag’s specifications or try a different tag.
  • Using the Shortcuts app incorrectly – the Shortcuts NFC action defaults to “Read”. You must change it to “Write” before running.
  • Writing a URL without “https://” – if you omit the protocol, iOS may not recognize it as a link.

Tips

  • Test your tag first – read it with your iPhone before writing to confirm it’s blank and compatible.
  • Use NTAG213 or NTAG215 tags – these are the most compatible with iPhones. Avoid tags with higher memory (NTAG216) if you only need a URL.
  • Keep tags away from metal – metal surfaces can interfere with NFC. Use a sticker tag on plastic or wood.
  • For automation, you can set up a Personal Automation in Shortcuts that triggers when an NFC tag is scanned – this works even without opening the Shortcuts app.
  • Write once, read many – most tags can be overwritten, but some are locked. Buy writable tags if you plan to change the content.

Troubleshooting

Tag not detected at all: First, ensure your iPhone supports NFC (iPhone 7 or later). Then check that the tag is not damaged – try reading it with another phone. If it works on another device, the issue is with your iPhone’s NFC antenna. Restart your iPhone and try again. If the tag is stuck to a metal surface, remove it.

Tag detected but content doesn’t open: This usually means the tag contains a format iOS doesn’t recognize. Use an NFC reader app to inspect the tag’s raw data. If it’s a URL, make sure it starts with “https://”. For text, the tag might be using a non-standard encoding.

Writing fails with “Tag not writable”: The tag is likely locked or read-only. Some tags are factory-locked. Try a different tag. Also, some cheap tags have limited write cycles – if you’ve written to it many times, it may be exhausted.

Shortcuts automation doesn’t trigger: Go to Settings > Shortcuts > Advanced and make sure “Allow Untrusted Shortcuts” is enabled. Also, the automation only works when the phone is unlocked and the screen is on.

Background reading only works on iPhone XS and later: If you have an iPhone X or earlier, you must use the Control Center NFC button every time. This is a hardware limitation, not a setting.

Frequently Asked Questions

Can I write NFC tags with the built-in iOS 13 Shortcuts app?

Yes, but with limitations. The Shortcuts app can write a single URL, text, or phone number, but it cannot write complex data like Wi-Fi credentials or vCards. For those, use a third-party app.

Which iPhone models support NFC tag reading in iOS 13?

iPhone 7, 8, X, XS, XR, and 11 series all support NFC reading. However, only iPhone XS, XR, and later can read tags in the background without opening Control Center. iPhone 7, 8, and X require the manual NFC scan button.

Can I overwrite an NFC tag after writing it?

Yes, if the tag is not locked. Most blank tags can be rewritten hundreds of thousands of times. However, some tags are sold pre-locked for security – those cannot be overwritten.

What is the maximum amount of data I can store on an NFC tag?

It depends on the tag type. NTAG213 stores 144 bytes, NTAG215 stores 504 bytes, and NTAG216 stores 888 bytes. For a URL, 144 bytes is usually enough. For a vCard or Wi-Fi config, you’ll need the larger tags.

Do NFC tags work through phone cases?

Thin plastic cases (under 3mm) usually work. Metal cases or cases with metal plates (like magnetic mounts) will block NFC. If you have a metal case, you’ll need to remove it or use a tag with a stronger signal.

Is it safe to write personal information to an NFC tag?

NFC tags are not encrypted by default. Anyone with an NFC reader can read the content. If you write sensitive data, consider using a tag with built-in security features or simply avoid storing passwords or personal IDs.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →