If your scanner, webcam, or all-in-one printer is missing from Windows 10, the cause is usually a driver conflict, a disabled device, or a Windows update that removed the device entry. You can fix it by checking Device Manager, reinstalling the driver, or using the built-in troubleshooting tools — most issues resolve in under 15 minutes. Below is a step-by-step guide to getting your imaging device recognized again, plus what to do when it disappears after an update.
Why Windows 10 Loses Imaging Devices
Windows 10 is aggressive about managing connected hardware. When you plug in a scanner or camera, the system assigns a driver and creates a device entry. That entry can vanish for several reasons:
- Driver corruption — a partial install or a failed update leaves the device in an unknown state.
- Windows Update interference — a feature update (like 22H2) sometimes resets device settings or removes non-Microsoft drivers.
- USB power management — Windows turns off the port to save power, and the device never wakes up.
- Disabled device — a previous error may have caused Windows to disable the device automatically.
- Conflicting software — manufacturer utilities (like HP, Canon, or Epson scan managers) can conflict with the built-in Windows Scan app.
The most common scenario is a device that worked yesterday and is gone today. In that case, the driver files are usually still on disk — Windows just lost the pointer to them. Reinstalling the driver from Device Manager often restores it without downloading anything.
Step 1: Check Device Manager First
Device Manager is the control center for all hardware. If your imaging device is missing there, Windows doesn’t see it at all. If it’s there but has a yellow exclamation mark, the driver is broken.
- Right-click the Start button and select Device Manager.
- Look under Imaging devices (for scanners and cameras), Cameras, or Universal Serial Bus devices.
- If you see the device with a yellow triangle, right-click it and choose Uninstall device. Check Delete the driver software for this device if you want a completely clean install.
- With the device uninstalled, unplug it, restart your PC, and plug it back in. Windows should re-detect it and install the driver automatically.
If the device is not listed at all, try Action → Scan for hardware changes from the menu bar. This forces Windows to re-enumerate all connected hardware. If it still doesn’t appear, move to the next step.
Step 2: Run the Built-In Troubleshooters
Windows 10 includes two troubleshooters that can automatically find and fix common imaging device problems:
- Hardware and Devices — this one checks for driver issues and hardware conflicts.
- Printer — even for scanners, this can help if the device is part of an all-in-one.
To run them:
- Open Settings → Update & Security → Troubleshoot.
- Click Additional troubleshooters.
- Select Hardware and Devices and run it. If you have a printer/scanner combo, also run Printer.
These tools will often reinstall the driver or reset the USB port. They won’t fix a physically broken device, but they handle most software-level issues.
Step 3: Reinstall the Manufacturer Driver
If Windows’ generic driver isn’t working, you need the manufacturer’s driver. Go to the support page for your exact model (e.g., “Canon LiDE 400 drivers” or “Epson Perfection V39”). Download the driver for Windows 10 64-bit (most modern PCs are 64-bit).
Before installing, uninstall any existing driver from Device Manager as described in Step 1. Then run the downloaded installer. If the installer says “device not found,” plug the device in after the software is installed, or follow the manufacturer’s connection order (some require the software first, then the USB cable).
If you already have the driver installed but the device is missing, try this:
- In Device Manager, click View → Show hidden devices.
- Look under Imaging devices for a grayed-out entry.
- Right-click it and choose Enable device.
Grayed-out entries are often leftover from a previous connection. Enabling them can bring the device back without any download.
Step 4: Fix USB Power Management and Ports
USB ports are a common culprit. Windows 10 can selectively suspend power to a port to save battery, which makes the device disappear. To disable this:
- Open Control Panel → Power Options → Change plan settings → Change advanced power settings.
- Expand USB settings → USB selective suspend setting → set to Disabled.
- Click OK and restart.
Also try a different USB port — preferably a USB 2.0 port (black) if you have one, as some older scanners don’t work reliably on USB 3.0 (blue). If you’re using a USB hub, plug the device directly into the PC. Hubs can fail to provide enough power, especially for flatbed scanners.
Step 5: Check the Windows Image Acquisition (WIA) Service
Windows uses a background service called Windows Image Acquisition (WIA) to communicate with scanners and cameras. If this service is stopped, your device won’t appear in apps even though Device Manager shows it.
- Press Win + R, type
services.msc, and press Enter. - Scroll to Windows Image Acquisition (WIA).
- Right-click it and select Start (if it’s not running).
- Set Startup type to Automatic (if it isn’t already).
- Restart your PC.
If the service won’t start, check that the Remote Procedure Call (RPC) service is running — WIA depends on it. If WIA is running but the device still doesn’t show up, try the next step.
Step 6: Use Windows Scan or a Third-Party App
Sometimes the device is fine, but the app you’re using doesn’t see it. Windows 10 includes a built-in Windows Scan app (available from the Microsoft Store) that works with most WIA-compliant scanners. If you’ve been using a manufacturer’s app, try Windows Scan instead — it’s lighter and less prone to conflicts.
If Windows Scan doesn’t list your device, open Settings → Devices → Printers & scanners. Click Add a printer or scanner. If your device appears in the list, select it and click Add device. This sometimes forces Windows to re-register the device.
Frequently Asked Questions
Why does my scanner keep disappearing after every Windows update?
Windows Update sometimes replaces the generic driver or changes the device’s power settings. After a feature update, reinstall the manufacturer’s driver from the support page. To prevent future issues, pause updates temporarily, or set the device to not be removed by updating the driver manually.
My device shows in Device Manager but not in any scanning app. What do I do?
This usually means the driver is installed but the WIA service isn’t running, or the app isn’t compatible. Start the WIA service (Step 5), then try Windows Scan. If that fails, uninstall the device from Device Manager and reinstall it.
Can I use a generic driver instead of the manufacturer’s?
Windows 10 includes a generic WIA driver that works for basic scanning on most devices. However, it may lack advanced features like multi-page scanning or film scanning. If the generic driver works, you’re fine; if not, install the manufacturer’s driver.
What if my imaging device is a webcam that Windows doesn’t detect?
Webcams are treated as cameras, not imaging devices. Check Device Manager under Cameras. If it’s missing, try uninstalling the USB controller (under Universal Serial Bus controllers) and restarting — Windows will reinstall it. Also check the camera’s privacy settings: Settings → Privacy → Camera — ensure “Allow apps to access your camera” is on.
Is there a way to recover a device that Windows says “Unknown Device”?
An “Unknown Device” in Device Manager means Windows can’t identify the hardware. Right-click it, choose Update driver, then Browse my computer → Let me pick from a list. Select Imaging devices and choose the manufacturer’s driver if listed. If not, you’ll need to download the driver manually from the manufacturer’s site.
Related
General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.
More in this bed
- iOS 18 Safari Not Working? Fixes That Help
- How to Check Your Linux Kernel for Spectre
- iPhone Safe Mode: How to Enable or Disable It
- Fix Slow Internet Lag on Samsung Galaxy Note
- How to Get iOS 17 on iPhone X (Safe Methods)
- Fix Gmail IMAP Error in Outlook: Step-by-Step