If your iPhone is stuck on the Apple logo and won’t turn on, the fix usually involves a forced restart, and if that doesn’t work, a recovery mode restore via a computer. This guide walks you through each step, from the quickest software reset to more advanced troubleshooting, so you can get your iPhone booting again.
Why Does the iPhone Get Stuck on the Apple Logo?
The Apple logo appears when your iPhone is booting up, loading its operating system (iOS). When it stays there for more than a few minutes, it means the boot process is failing. Common causes include:
- A failed iOS update or restore – an interrupted download or installation can leave the system files incomplete.
- Corrupted system files – sometimes files become damaged during normal use, often after a crash or a low-storage situation.
- A problematic app or tweak – if you’ve jailbroken your device or installed a beta profile, a buggy component can halt the boot.
- Hardware issues – a failing battery, damaged storage chip, or loose internal connector can prevent iOS from loading.
Before You Panic: Try a Forced Restart
A forced restart is the first thing to try. It’s not the same as turning your phone off and on; it cuts power to the hardware and forces a clean boot. It does not erase any data.
For iPhone 8 or later (including SE 2nd gen and newer):
- Press and quickly release the Volume Up button.
- Press and quickly release the Volume Down button.
- Press and hold the Side button until the Apple logo appears, then keep holding for another 10–15 seconds. If the screen goes black and the logo reappears, let go.
For iPhone 7 and 7 Plus: Press and hold both the Side and Volume Down buttons for at least 10 seconds, until the logo appears again.
For iPhone 6s and earlier (including SE 1st gen): Press and hold both the Home and the Top/Side buttons for at least 10 seconds.
If the logo persists after a forced restart, move on to recovery mode.
How to Fix with Recovery Mode (Erases Data)
Recovery mode is a special boot state that lets your computer communicate with the iPhone to reinstall iOS. This will erase your device, so only do this if you have a backup or are prepared to lose data.
What you need: A computer (Mac or Windows PC) with the latest version of iTunes (on Windows or macOS Mojave or earlier) or Finder (on macOS Catalina or later). A USB cable.
Steps:
- Connect your iPhone to the computer.
- Put your iPhone into recovery mode using the same button sequences as a forced restart, but hold the button(s) until the recovery mode screen appears – a computer icon with a cable.
- On your computer, a dialog will pop up offering to Update or Restore. Choose Update first – it tries to reinstall iOS without erasing your data. If that fails or is unavailable, you’ll need to choose Restore.
- Wait for the process to finish. Your iPhone will restart and show the setup screen.
If your computer doesn’t recognize the device, try a different USB port or cable, and make sure you’re using a genuine Apple cable (some third-party cables don’t support data transfer).
What If Recovery Mode Doesn’t Work?
If recovery mode fails, or your iPhone keeps looping back to the Apple logo, you may need to try DFU (Device Firmware Update) mode. DFU is a deeper restore that doesn’t load iOS at all – it only runs the bootloader. It’s more likely to succeed when the system is severely corrupted.
Enter DFU mode (iPhone 8 and later):
- Connect to your computer and open iTunes/Finder.
- Press Volume Up, then Volume Down, then hold the Side button for 10 seconds.
- Keep holding the Side button, but also press and hold Volume Down for 5 seconds.
- Release the Side button but keep holding Volume Down for another 10 seconds.
- If the screen stays black, you’re in DFU. If the Apple logo appears, you missed it – try again.
Once in DFU, your computer should detect a device in recovery mode, and you can restore it. DFU is a bit tricky – if you can’t get it, try recovery mode again.
When It’s a Hardware Problem
If neither recovery nor DFU works, or if your iPhone gets stuck at the logo only after a drop or water exposure, the issue is likely hardware. Common culprits:
- Battery failure – a swollen or dead battery can prevent boot. If your iPhone feels warm or the screen bulges, stop using it immediately.
- Logic board issues – a damaged component on the main board, often from a drop, can cause boot loops.
- Storage chip problems – if the NAND flash is failing, iOS can’t read system files.
In these cases, you’ll need professional repair. Apple Support can diagnose the issue, and third-party repair shops may offer cheaper options. If your iPhone is under warranty or AppleCare+, Apple will cover hardware failures (except accidental damage).
Prevention and What to Do Next
Once your iPhone is working again, take steps to avoid a repeat:
- Keep iOS up to date – but wait a few days after a major release to let Apple fix bugs.
- Back up regularly – use iCloud or your computer so a future failure doesn’t cost you everything.
- Avoid beta software unless you’re a developer – beta builds are more likely to have boot issues.
- Don’t let storage fill completely – a full disk can cause system instability.
If you had to restore, you’ll need to set up your iPhone as new or restore from a backup. If you don’t have a backup, you may be able to recover some data from the failed device using third-party tools, but success is not guaranteed.
Frequently Asked Questions
Will a forced restart erase my data?
No. A forced restart is like pulling the plug on a computer – it doesn’t touch your files or settings. It only forces the hardware to reboot.
My iPhone is stuck but the screen is black – what’s different?
A black screen with no response might mean the battery is completely drained, or the screen is damaged. Plug it into power for at least 30 minutes, then try a forced restart. If the screen remains black but your computer detects it, the display may be broken.
Can I fix a boot loop without a computer?
Sometimes. If the loop is caused by a temporary glitch, a forced restart might break it. But if the system files are corrupted, you’ll need a computer to reinstall iOS. There’s no way to do that directly on the iPhone.
Why does my iPhone keep showing the Apple logo and then restarting?
This is a boot loop – the iPhone starts to boot, fails, and restarts. It’s often caused by a failed update or a hardware issue. Try recovery mode first; if it persists, it’s likely hardware.
How do I know if my iPhone is in recovery mode vs. DFU mode?
Recovery mode shows a computer icon on the screen. DFU mode shows a completely black screen. If you see the Apple logo, you’re not in either mode.
What if I don’t have a backup and recovery mode fails?
Your data is likely unrecoverable without professional help. Some third-party data recovery services can attempt to extract data from the storage chip directly, but it’s expensive and not always successful. Going forward, always keep a backup.
Related
General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.
More in this bed
- Gmail Notifications Not Working? Fixes That Work
- Fix Thumbnails Not Showing on Network Drives in Windows 11
- Stop Skype Auto-Start in Windows: 5 Fixes
- SQL Injection Prevention: Step-by-Step Guide
- Fix Windows PowerShell Popping Up
- Print iMessage or Text Conversations on iPhone & iPad