sodcalculator

10 Tech How-To

MacOS How to Add Printer: Step-by-Step Guide

Guide 10-45313 · Updated · Step by step

To add a printer on a Mac, open System Settings (or System Preferences on older macOS versions), click Printers & Scanners, then click the plus (+) button and follow the prompts. This guide walks you through the entire process, including wireless, USB, and network printers, plus troubleshooting tips.

Before You Start: What You Need

Adding a printer to your Mac is usually straightforward, but a few things help ensure success:

  • Printer power and connectivity: Make sure the printer is turned on and connected to the same Wi-Fi network as your Mac (for wireless printers) or plugged into your Mac via USB.
  • macOS version: The steps differ slightly between macOS Ventura and later (System Settings) and earlier versions (System Preferences). This guide covers both.
  • Printer drivers: Most modern printers use AirPrint, which requires no driver installation. For others, macOS may download drivers automatically, or you may need to install them from the manufacturer’s website.

How to Add a Printer (macOS Ventura and Later)

  1. Click the Apple menu (top-left corner) and select System Settings.
  2. Scroll down and click Printers & Scanners in the sidebar.
  3. Click the Add Printer, Scanner, or Fax… button (a plus icon).
  4. A dialog will appear listing available printers. Select your printer from the list. If it’s not listed, try the IP or Windows tabs (see below).
  5. If macOS finds the correct driver, it will show “Secure AirPrint” or the printer model. If not, use the Use drop-down menu to select the correct driver (or “AirPrint” if available).
  6. Click Add. Your printer will appear in the list and be set as the default (if you choose).

How to Add a Printer (macOS Monterey and Earlier)

  1. Click the Apple menu and select System Preferences.
  2. Click Printers & Scanners.
  3. Click the plus (+) button at the bottom of the left panel.
  4. Select your printer from the list, or use the IP tab for network printers.
  5. Choose the correct driver from the Use drop-down if not auto-selected.
  6. Click Add.

Adding a Network Printer by IP Address

If your printer doesn’t appear automatically (common on some office networks), you can add it manually using its IP address:

  1. Find your printer’s IP address. Usually printed on a label on the printer, or accessible via the printer’s control panel under Network Settings. You can also check your router’s admin page.
  2. In the Add Printer dialog, click the IP tab.
  3. Enter the IP address in the Address field.
  4. Leave Protocol as Line Printer Daemon (LPD) or choose Internet Printing Protocol (IPP) if you know it works.
  5. Enter a name for the printer (optional).
  6. Select the correct driver in Use (try AirPrint if available).
  7. Click Add.

Adding a Windows Printer (SMB)

If you’re on a network with Windows computers and a shared printer:

  1. In the Add Printer dialog, click the Windows tab.
  2. You’ll see a list of workgroups and computers. Navigate to the computer sharing the printer.
  3. Select the printer and click Add.
  4. You may be prompted for a username and password for the Windows machine.
  5. macOS will attempt to install the driver. If it fails, you may need to download the driver from the printer manufacturer’s website.

Common Problems and Fixes

  • Printer not showing up: Check that the printer is on the same Wi-Fi network. Restart both the printer and your Mac. Try disabling and re-enabling Wi-Fi on your Mac.
  • Driver issues: If the “Use” drop-down shows “Generic PostScript Printer” or “Generic PCL Printer,” the correct driver isn’t installed. Visit the manufacturer’s website to download the latest macOS driver.
  • Printer shows as “Paused” or “Offline”: Open Printers & Scanners, right-click (or Control-click) your printer and select Reset Printing System (this removes all printers and resets settings—you’ll need to re-add them).
  • AirPrint not working: Ensure the printer supports AirPrint (check the manual or manufacturer’s site). Some older printers require a firmware update.
  • USB printer not detected: Try a different USB port or cable. Check System Information (About This Mac → System Report → USB) to see if the Mac sees the printer.

Choosing the Right Driver

macOS includes built-in drivers for many printers, but not all. Here’s how to choose:

  • AirPrint: If your printer supports AirPrint, select this option. It requires no driver download and works seamlessly.
  • Manufacturer driver: For full functionality (e.g., scanner, duplex, color management), download the driver from the manufacturer’s website. Look for the macOS version (Intel or Apple Silicon).
  • Generic drivers: If no specific driver exists, try Generic PostScript Printer or Generic PCL Printer—these work for basic printing but may lack advanced features.

Frequently Asked Questions

Why can’t my Mac find my printer?
Most often it’s a network issue. Ensure the printer is on the same Wi-Fi network as your Mac (check the printer’s network settings). Restart both devices. If using USB, try a different port or cable. Also, check if the printer is in “sleep” mode—wake it up.

How do I remove a printer from my Mac?
Go to System Settings (or System Preferences) → Printers & Scanners, select the printer, and click the minus (–) button. If you want to remove all printers and reset the printing system, right-click anywhere in the list and choose “Reset Printing System.”

What is AirPrint and do I need it?
AirPrint is Apple’s wireless printing protocol. It lets you print without installing drivers. If your printer supports AirPrint, it’s the easiest option—just select it and add. Many modern printers support AirPrint, but older models may not.

Why is my printer showing as “Paused”?
This can happen due to a paper jam or a stuck print job. Open Printers & Scanners, select the printer, and click “Resume” if available. If not, delete all jobs in the print queue, then try again. If it persists, restart your Mac and printer.

Can I add a printer that’s connected to a Windows PC?
Yes, if the printer is shared on the Windows network. Use the Windows tab in the Add Printer dialog. You’ll need the Windows computer’s network name and possibly login credentials. Ensure file and printer sharing is enabled on the Windows machine.

Do I need to install drivers for a USB printer?
Usually not—macOS has built-in drivers for many USB printers. If your printer isn’t recognized, you may need to download the driver from the manufacturer’s website. Some very old printers may not have macOS-compatible drivers.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →