sodcalculator

10 Tech How-To

Printer configuration error 0x80040003? Fix it

Guide 10-54110 · Updated · Step by step

Printer configuration error 0x80040003 usually appears when Windows cannot apply a printer driver setting or port configuration, often after a driver update or a network printer reconnection. The fix is to remove the printer completely, delete its driver files, and reinstall the driver from the manufacturer’s website. Below is a step-by-step guide that works for most Windows 10 and Windows 11 systems.

What Does Error 0x80040003 Mean?

The hexadecimal code 0x80040003 is a Windows error that translates to “The specified printer driver is not currently installed” or “The printer driver is unknown.” It is not a hardware failure – your printer hardware is usually fine. The error occurs at the software layer, where Windows tries to load a driver that is missing, corrupted, or incompatible with the current operating system version.

You will typically see this error in the following situations:

  • When you click Printer Properties or Printing Preferences in the Settings app or Control Panel.
  • When you try to add a network printer manually using its IP address or hostname.
  • When you attempt to change the printer port or driver settings after a Windows update.
  • When you connect a printer that was previously installed on another computer.

The error is not unique to any single printer brand; it appears across HP, Canon, Epson, Brother, and generic drivers. It is more common on 64-bit Windows systems when a 32-bit driver is installed, or when the driver package is incomplete.

Why Does This Error Happen?

Windows stores printer drivers in a system folder called C:\Windows\System32\spool\drivers. When you install a printer, Windows copies the driver files there and registers them in the registry. Error 0x80040003 appears when that registration is broken. Common causes include:

  • Corrupted driver cache: A partial download or interrupted installation leaves the driver files incomplete.
  • Conflicting driver versions: An older driver remains in the spooler cache after a new one is installed, causing a conflict.
  • Windows Update changed the driver: Windows may replace a manufacturer driver with a generic “Microsoft IPP Class Driver” or “Microsoft XPS Document Writer” driver, which does not support all printer features.
  • Incorrect port settings: A network printer with a changed IP address or a USB printer with a changed port number can trigger the error.
  • Permissions issues: The user account may not have full control over the printer driver folder, preventing the driver from loading.

Understanding the cause helps you choose the right fix. For most users, a full driver reinstall resolves the issue. For others, adjusting the port or clearing the spooler cache is enough.

Step-by-Step Fix: Remove and Reinstall the Printer

This is the most reliable method. It clears both the printer object and the driver files, then rebuilds them from scratch.

  1. Open Settings: Press Windows + I, go to Bluetooth & devices > Printers & scanners (Windows 11) or Devices > Printers & scanners (Windows 10).
  2. Remove the printer: Click the printer name, then click Remove. Confirm if prompted.
  3. Open Device Manager: Press Windows + X and select Device Manager. Expand Print queues. If your printer still appears there, right-click it and select Uninstall device. Check the box “Delete the driver software for this device” if it appears.
  4. Clear the print spooler: Press Windows + R, type services.msc, and press Enter. Find Print Spooler, right-click it, and select Stop. Leave the Services window open.
  5. Delete driver files: Open File Explorer and go to C:\Windows\System32\spool\drivers\x64\3 (for 64-bit drivers) or C:\Windows\System32\spool\drivers\W32x86\3 (for 32-bit). Delete all files in that folder. If you see a “file in use” error, make sure the Print Spooler service is stopped.
  6. Restart the spooler: Go back to the Services window, right-click Print Spooler, and select Start.
  7. Reinstall the driver: Download the latest driver from the printer manufacturer’s support website. Run the installer and follow the on-screen instructions. Choose the connection type (USB or network) when prompted.
  8. Test the printer: After installation, print a test page from Printer Properties > Print Test Page.

If the error persists after this, the driver package itself may be incompatible with your Windows version. Try the “Windows Update” driver option in the installer, or use the built-in “Add a printer” wizard and select “The printer that I want isn’t listed” to add it by IP address.

Alternative Fix: Change the Printer Port

Sometimes the error is not the driver but the port. If you are using a network printer, its IP address may have changed. Windows still points to the old IP, causing the driver to fail loading.

  1. Open Printer Properties (right-click the printer > Properties).
  2. Go to the Ports tab.
  3. If the current port has a checkmark next to a “WSD” or “Network” port, click Add Port.
  4. Choose Standard TCP/IP Port, then click New Port.
  5. Enter the printer’s current IP address. You can find it on the printer’s display panel or by printing a network configuration page.
  6. Click OK and then close the Properties window. Try printing again.

If you are using a USB printer, try a different USB port on your computer. Windows will re-detect the device and may reinstall the driver automatically.

What If the Error Appears When Adding a Network Printer?

When you manually add a network printer by IP address, Windows may fail to install the correct driver. This is often because the printer’s embedded web server (EWS) does not provide the driver, or because Windows uses a generic driver that is not compatible.

In that case, add the printer using the manufacturer’s installation utility instead of the Windows wizard. Most printer manufacturers offer a “full driver package” that includes the installer. Run that first, then add the printer through the utility. If you must use Windows, try this:

  1. In Printers & scanners, click Add device.
  2. Wait for Windows to search. When it shows “The printer that I want isn’t listed,” click that link.
  3. Select Add a printer using a TCP/IP address or hostname and click Next.
  4. Enter the IP address. Uncheck “Query the printer and automatically select the driver to use” if it is checked.
  5. Choose the correct manufacturer and model from the list, or click Have Disk to browse to the driver you downloaded.

This bypasses Windows’ automatic driver detection, which is often the source of the 0x80040003 error.

How to Prevent This Error in the Future

Once you fix the error, a few habits can stop it from returning:

  • Always download drivers from the manufacturer’s website, not from third-party driver download sites.
  • Uninstall the old driver before installing a new one, especially after a major Windows update.
  • Do not use “Microsoft IPP Class Driver” unless your printer supports IPP Everywhere – it often lacks advanced features and can cause configuration errors.
  • Set a static IP address for network printers in your router’s DHCP reservation settings, so the IP never changes.
  • Keep Windows updated, but check the printer manufacturer’s website for driver compatibility notes before installing a feature update.

If you use multiple printers, consider removing unused printers from Windows. Each printer driver adds registry entries, and conflicts between them can cause errors like 0x80040003.

Frequently Asked Questions

Can I ignore error 0x80040003 and still print?

Sometimes you can still print from basic apps like Notepad, but you will not be able to change printer settings, duplex printing, or paper size. The error usually blocks the printer properties dialog, so you cannot adjust quality or color settings. It is best to fix it.

Does this error mean my printer is broken?

No. The error is purely a software/configuration issue. Your printer hardware is likely fine. If you can print a test page from the printer’s own control panel (if it has one), the hardware is working.

Will a Windows system restore fix this error?

Sometimes, if the error appeared after a recent driver installation or Windows update. System restore can revert the driver registry to a previous state. However, it may also remove other recent changes. Try the driver reinstall method first – it is more targeted.

Why does the error appear on a brand-new printer?

New printers often ship with a CD that contains an outdated driver. Windows 10/11 may also install a generic driver automatically. The generic driver may not support the printer’s full feature set, causing the configuration error. Download the latest driver from the manufacturer’s website to fix it.

Is it safe to delete files in the spool\drivers folder?

Yes, but only when the Print Spooler service is stopped. The files in that folder are just cached driver files. Windows will reinstall them when you add a printer again. Deleting them while the spooler is running can cause other print jobs to fail, so always stop the service first.

What if the error appears on a network printer that other computers can use?

That means the printer itself is fine and the issue is specific to your computer’s driver configuration. Follow the reinstall steps on your machine. If other computers use the same driver successfully, compare their driver versions with yours – you may need to install the same version.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →