sodcalculator

10 Tech How-To

Rust for Linux: Build Safe Drivers & C API

Tag 10-55076 · Updated · Standard formula, shown below

Volume 9.26 yd³
Volume
250.0 ft³
Result
Lawn length
40 ft
You entered
Lawn width
25 ft
You entered
You enter
Lawn length, Lawn width, Depth
You get
Volume, Volume
Rounding
2 dp · 1 dp

Rust for Linux lets you write kernel modules and drivers with memory safety guarantees that C cannot offer, and you can expose them to C code through a C API using the extern "C" ABI. To build a safe driver, you use the kernel’s Rust abstractions (e.g., kernel::chrdev, kernel::platform) instead of raw pointers, and you create a C API by defining functions with #[no_mangle] pub extern "C" and then calling them from C via a header file. This article explains the current state of Rust in the Linux kernel, how to set up a development environment, write a basic driver, and bridge it to C.

Formula

The calculator computes the volume of topsoil or fill needed for a rectangular lawn. The formula is:

Volume (yd³) = (Length × Width × Depth) / 324

where Length and Width are in feet, Depth is in inches, and the divisor 324 converts cubic feet to cubic yards (since 1 yard = 3 feet, 1 yd³ = 27 ft³, and with depth in inches, you divide by 12 first: ft³ = L×W×(D/12), then yd³ = ft³/27 = L×W×D/(12×27) = L×W×D/324).

Variables:

  • L – lawn length (ft)
  • W – lawn width (ft)
  • D – depth of material (in)

Worked Example

Using the defaults from the calculator: L = 40 ft, W = 25 ft, D = 3 in.

  1. Compute cubic feet: 40 × 25 × (3/12) = 40 × 25 × 0.25 = 250 ft³.
  2. Convert to cubic yards: 250 / 27 = 9.26 yd³ (rounded to 2 decimals).
  3. The calculator also shows ft³ directly: 40 × 25 × 3 / 12 = 250 ft³.

So for a 40×25 ft lawn with 3 inches of material, you need about 9.26 cubic yards.

When to Use This Calculation

Use this when ordering topsoil, compost, mulch, or fill dirt for a garden bed, lawn leveling, or a raised bed. It also works for estimating concrete if you convert depth to inches (though concrete is usually sold by the cubic yard). For irregular shapes, break the area into rectangles and sum the volumes.

Common Mistakes

  • Unit mix-ups: Forgetting to convert depth from inches to feet. The formula uses inches directly, but if you input depth in feet, the result is wrong.
  • Rounding too early: Rounding intermediate steps can cause errors. Keep full precision until the final answer.
  • Ignoring compaction: For soil or gravel, the delivered volume may settle, so order 10-15% extra if compaction matters.

Limitations

The formula assumes a perfectly rectangular area with uniform depth. Real lawns have slopes, curves, and obstacles. Also, material density varies (e.g., wet topsoil weighs more than dry), but volume is independent of density—only weight changes. For weight, multiply volume by the material’s density (e.g., ~1,000 kg/m³ for dry topsoil).

Frequently Asked Questions

How many bags of soil do I need?

Bags are typically sold in cubic feet (e.g., 1.5 ft³ or 2 ft³). Divide your total cubic feet by the bag size and round up. For 250 ft³ with 2 ft³ bags, you need 125 bags.

What if my lawn is not a perfect rectangle?

Divide it into rectangles, calculate each volume, and add them. For triangles, use 0.5 × base × height for the area.

Should I order extra?

For soil and mulch, order 5-10% extra to account for settling and spillage. For concrete, order exactly what you need plus a small margin, but confirm with a supplier.

How deep should the layer be?

For topdressing a lawn, 1/4 to 1/2 inch is typical. For a new garden bed, 6-12 inches. For leveling, it varies by the depression depth.

Does the calculator work for metric?

No, it uses feet and inches. For metric, use meters and centimeters: volume (m³) = L×W×D/100, then convert to cubic yards by multiplying by 1.30795.

Related

Formula used
in l | Lawn length | ft | 40 | 0 | 100000
in w | Lawn width | ft | 25 | 0 | 100000
in d | Depth | in | 3 | 0 | 120
out yd | Volume | yd³ | l * w * d / 324 | 2
out ft3 | Volume | ft³ | l * w * d / 12 | 1

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.

More in this bed

The whole Tech How-To bed →