To set up Remote Desktop on Windows 10, you enable the built-in Remote Desktop feature in Settings, then connect from another device using the Remote Desktop client. This guide walks through the exact steps for both the host PC and the client, including network configuration, common troubleshooting, and security best practices.
What Remote Desktop Does and How It Works
Remote Desktop Protocol (RDP) is a proprietary Microsoft protocol that lets you connect to another computer over a network and control it as if you were sitting in front of it. The host machine must be running Windows 10 Pro, Enterprise, or Education — Windows 10 Home does not support hosting RDP connections (though it can still connect to other machines). The client device can be another Windows PC, a Mac, a smartphone, or a tablet using the Microsoft Remote Desktop app.
When you connect, RDP sends your keyboard and mouse input to the host and streams the host’s screen back to you. It also supports audio redirection, clipboard sharing, and drive mapping, making it feel like a local session. The protocol encrypts the connection by default, but for internet access you should use a VPN or the Remote Desktop Gateway to avoid exposing RDP directly to the internet.
Prerequisites and What You Need Before Starting
Before enabling Remote Desktop, verify the following:
- Windows edition: The host must be Windows 10 Pro, Enterprise, or Education. If you have Home, you cannot host RDP without third-party software or upgrading your edition.
- Network access: Both devices must be on the same local network, or the host must be reachable over the internet via port forwarding or a VPN.
- Account password: The host account must have a password. Accounts with no password are not allowed for RDP connections.
- Power settings: The host should be set to never sleep, or you will not be able to connect when it is asleep.
- Firewall: Windows Defender Firewall must allow Remote Desktop (it typically does by default when you enable the feature).
Step-by-Step: Enable Remote Desktop on the Host PC
- Open Settings (Win + I) and go to System > Remote Desktop.
- Toggle Enable Remote Desktop to On. Click Confirm when prompted.
- Note the PC name shown under How to connect to this PC — you will need this to connect from another device.
- Optionally, click Advanced settings to require Network Level Authentication (NLA) — keep this enabled for better security.
- If you want to allow specific users, click Select users that can remotely access this PC and add them. By default, your current user account is allowed.
- Ensure the host’s power plan is set to Never sleep (Control Panel > Power Options).
Connecting from Another Windows PC
On the client machine (any Windows edition), use the built-in Remote Desktop Connection app:
- Press Win + R, type
mstsc, and press Enter. Alternatively, search for “Remote Desktop Connection” in the Start menu. - In the Computer field, enter the host PC’s name (e.g.,
DESKTOP-ABC123) or its IP address. - Click Connect. If prompted, enter the host’s username and password.
- If you see a certificate warning, click Yes to proceed (the certificate is self-signed by default).
- You should now see the host’s desktop. You can adjust display and resource settings via the Show Options button before connecting.
For local network connections, using the PC name is fine. If you are connecting over the internet, you will need the public IP address and to forward port 3389 on your router — but this is risky without a VPN or gateway.
Setting Up Remote Desktop for Internet Access (Safely)
If you need to access your PC from outside your home network, do not simply forward port 3389. That exposes RDP to the entire internet and is a common target for brute-force attacks. Safer options include:
- Use a VPN: Set up a VPN server on your home network (or use a router with built-in VPN) and connect to it before using RDP. This keeps RDP traffic inside an encrypted tunnel.
- Remote Desktop Gateway: This Microsoft service acts as an intermediary, allowing RDP over HTTPS (port 443) without exposing the RDP port directly. It requires a server running Windows Server or a third-party gateway.
- Use the Windows App with a Microsoft account: The Remote Desktop app for Windows, macOS, iOS, and Android can connect via a “Remote Desktop Gateway” or through a “Workspace” URL provided by your organization. For personal use, a VPN is the simplest.
If you must port forward, at least change the default RDP port (3389) to a random high port, use a strong password, and enable NLA. However, this is not recommended for long-term use.
Common Problems and How to Fix Them
Even with correct setup, you may hit issues. Here are the most frequent ones:
- “Another user is signed in” error: If the host has an active local session, RDP will disconnect it. You can avoid this by using a separate account or by allowing concurrent sessions (requires Windows Server or third-party tools).
- “This computer can’t connect to the remote computer” — Check that the host is on, awake, and reachable. Try pinging its IP address. Ensure the Remote Desktop service (TermService) is running (services.msc).
- Credential errors: If you get “Your credentials did not work,” make sure you’re using the host’s local account username and password, not your Microsoft account email unless it’s linked. You can also try
COMPUTERNAME\Usernameformat. - Network Level Authentication error: If NLA is enabled on the host but the client doesn’t support it (older Windows versions), you can disable NLA temporarily, but it’s better to update the client.
- Firewall blocking: If the connection times out, check that Windows Defender Firewall allows “Remote Desktop” (private and public profiles). You can temporarily disable the firewall to test, but re-enable it after.
- Sleep mode: If the host goes to sleep, RDP cannot wake it. Set power options to never sleep, or use Wake-on-LAN if you need remote wake.
Alternatives to Built-in Remote Desktop
If you have Windows 10 Home or need more features, consider these alternatives:
- Quick Assist: Built into Windows 10, it allows remote control but requires someone on the host to accept the connection. Good for support, not unattended access.
- Chrome Remote Desktop: Free, works across platforms, and runs in the browser. It supports unattended access with a PIN.
- TeamViewer / AnyDesk: Popular third-party tools with more features (file transfer, mobile apps) but often require a paid license for heavy use.
- VNC (Virtual Network Computing): Open-source and platform-independent, but generally less secure and slower than RDP.
Each has its trade-offs in security, performance, and ease of use. For most Windows-to-Windows scenarios, built-in RDP is the best choice if you have Pro.
Security Best Practices for Remote Desktop
RDP is a common attack vector, so follow these practices:
- Use strong passwords: At least 12 characters, mix of letters, numbers, and symbols.
- Enable Network Level Authentication (NLA): This requires authentication before a full RDP session is established, reducing attack surface.
- Limit user access: Only add the accounts that truly need remote access.
- Keep Windows updated: Microsoft regularly patches RDP vulnerabilities.
- Use a VPN for internet access: Never expose RDP directly to the internet if you can avoid it.
- Monitor logs: Check Event Viewer (Windows Logs > Security) for failed login attempts.
If you suspect a breach, disconnect immediately and change passwords.
Frequently Asked Questions
Can I use Remote Desktop on Windows 10 Home? No, Windows 10 Home does not include the Remote Desktop host feature. You can only use the client to connect to other machines. To host, you need Pro, Enterprise, or Education, or use third-party software.
How do I find my PC’s IP address for Remote Desktop? On the host, open Command Prompt and type ipconfig. Look for the IPv4 address under your active network adapter (e.g., 192.168.1.10). For internet access, you need your public IP (search “what is my IP” in a browser), but that changes unless you have a static IP.
Why does Remote Desktop say “Your credentials did not work”? This usually means you’re entering the wrong username or password. Make sure you’re using the host’s local account credentials. If you use a Microsoft account, try the email address associated with it. Also, the host account must have a password set.
Can I copy and paste files between my local and remote PC? Yes, by default RDP allows clipboard sharing. To transfer files, you can enable drive redirection in the client: before connecting, click Show Options > Local Resources > More > check the drives you want to share. Then you can copy/paste files between the local and remote drives.
Is Remote Desktop safe to use over the internet? It can be safe if you use a VPN or Remote Desktop Gateway, and if you follow security best practices. Exposing port 3389 directly to the internet is risky and not recommended.
How do I restart the Remote Desktop service if it’s not working? Open Run (Win + R), type services.msc, find “Remote Desktop Services” (TermService), right-click and select Restart. Do the same for “Remote Desktop Configuration” if needed.
Related
General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.
More in this bed
- MacBook Charger Not Working? Fix It Now
- Fix Windows Cannot Be Installed to This Disk
- Zoom on iPhone & iPad: Host or Join a Meeting
- Fix iPhone SE 4 Unable to Activate: Step-by-Step
- Keep Important Emails From Getting Buried in iPhone Mail Categories
- How to Clear RAM on iPhone: Speed It Up