If your Windows 10 installation has failed, you’re not alone—this is one of the most common issues when upgrading or doing a clean install. The fix depends on the error message you see, but most failures stem from a few predictable causes: corrupted installation files, insufficient disk space, incompatible drivers, or a faulty boot configuration. Below, I’ll walk you through the most effective solutions, step by step.
Why Windows 10 Installation Fails
Windows 10 installation can fail at any stage—during the initial copying of files, after the first reboot, or even when you’re setting up your account. The underlying reasons usually fall into one of these categories:
- Corrupted or incomplete installation media (USB or ISO file)
- Insufficient storage space on the target drive
- Incompatible or outdated drivers, especially for storage controllers (RAID, NVMe)
- UEFI vs. Legacy BIOS mismatch—the installation media is booted in the wrong mode
- Interference from antivirus or third-party software
- Faulty RAM or hard drive that causes file corruption during copying
Sometimes the error message is vague, like “Windows could not complete the installation” or “The computer started with the Windows installation media. Remove the media and restart your computer.” Other times you’ll see a specific error code, such as 0x80070070 (disk space) or 0x80070570 (corrupted files). Knowing the code helps, but the general troubleshooting steps below cover most scenarios.
Step-by-Step Fixes for a Failed Installation
Try these in order—they’re listed from simplest to most involved. If one doesn’t work, move to the next.
- Recreate your installation media. Use Microsoft’s Media Creation Tool to make a fresh USB drive (at least 8GB) or download a new ISO. A bad USB port or a corrupted download is a frequent culprit. If you’re using a USB 3.0 drive, try a USB 2.0 port.
- Check disk space. Windows 10 needs at least 20GB for 64-bit, but 50GB or more is recommended. If you’re upgrading from an older version, free up space or use a larger drive.
- Disable Secure Boot and enable CSM (Compatibility Support Module). If you’re installing in Legacy mode, Secure Boot can block it. Conversely, if you’re installing in UEFI mode, make sure your USB is booted in UEFI mode (look for “UEFI: [USB name]” in the boot menu).
- Remove unnecessary peripherals. Disconnect extra hard drives, printers, and external devices. Sometimes a secondary drive confuses the installer.
- Update drivers. If you’re upgrading from Windows 7 or 8, update your chipset, storage, and network drivers beforehand. For clean installs, download the latest drivers for your motherboard’s storage controller (Intel RST, AMD RAID) and load them during installation when prompted.
- Run a memory test. Use Windows Memory Diagnostic (type “mdsched.exe” in Run) or a third-party tool like Memtest86. Bad RAM can cause random failures.
- Check the hard drive for errors. Run
chkdsk /f /rfrom Command Prompt (Shift+F10 during setup) on the drive you’re installing to. - Disable antivirus. If you’re upgrading, temporarily disable third-party antivirus and any drive encryption (like BitLocker) before starting.
Common Error Messages and What They Mean
Here are the most frequently encountered error codes and their typical fixes:
- 0x80070070 – 0x50011: Not enough disk space. Free up space or use a larger drive.
- 0x80070570: Corrupted installation files or hardware issue. Recreate the media and check RAM.
- 0xC1900101: Driver failure. Update drivers, especially storage and display drivers.
- 0x800F0922: Cannot connect to Windows Update or a partition issue. Check internet connection and ensure the System Reserved partition is large enough.
- 0x80070002: Missing files. Recreate the installation media.
If you see an error that isn’t listed, search the exact code online—Microsoft has a database of most codes, and the community often posts solutions.
How to Perform a Clean Install (If Upgrades Keep Failing)
If you’re upgrading from an older Windows version and it fails repeatedly, a clean install is often the most reliable path. Here’s how:
- Back up your data to an external drive or cloud service.
- Download the Media Creation Tool from Microsoft’s website and create a bootable USB.
- Boot from the USB (you may need to press F12, F2, or Del during startup to enter the boot menu).
- Choose “Custom: Install Windows only (advanced)” when asked for the installation type.
- Delete all partitions on the target drive (unless you have multiple drives; be careful to select the correct one).
- Select the unallocated space and click Next. Windows will create the necessary partitions automatically.
This wipes everything, so only do it if you have backups. After the clean install, you’ll need to reinstall your programs and drivers.
What to Do If the Installation Fails After the First Reboot
Sometimes the installation gets to “Getting devices ready” and then fails. This is often caused by a driver issue. Try these:
- Boot into Safe Mode by pressing Shift+F8 during startup (or using the recovery environment).
- Uninstall recently installed drivers from Device Manager, especially display and network adapters.
- Disable automatic driver updates temporarily via System Properties > Hardware > Device Installation Settings.
- Use System Restore to revert to a previous state if you have a restore point.
If you can’t boot into Windows, use the “Repair your computer” option on the installation media to access Advanced Startup Options.
Frequently Asked Questions
Why does my Windows 10 installation keep failing at 99%?
Failing at 99% often indicates a driver issue, especially with storage or display. Try disconnecting all non-essential hardware, updating your BIOS, and ensuring you have the latest storage drivers. Also, check that your hard drive isn’t failing by running a diagnostic tool.
Can I install Windows 10 without a product key?
Yes, you can click “I don’t have a product key” during installation. Windows will install and run in an unactivated state, with limited personalization options. You can enter a key later in Settings > Update & Security > Activation.
How long should a Windows 10 installation take?
Typically 20-30 minutes on a modern PC with an SSD. If it takes longer than an hour, something may be wrong. Check for overheating, failing hardware, or a slow USB drive.
Will I lose my files if I reinstall Windows 10?
If you choose “Upgrade” during installation, your files and apps are kept. If you choose “Custom” and delete partitions, you lose everything. Always back up important files before reinstalling.
What does “Windows could not prepare the computer to boot into the next phase” mean?
This error (often 0x80070017) indicates that the installation media cannot read a file or the hard drive is having issues. Recreate the USB drive, check your RAM, and verify the integrity of your hard drive.
Should I use a 32-bit or 64-bit version?
If your PC has more than 4GB of RAM, use 64-bit. Most modern PCs are 64-bit. You can check in System Information on your current Windows. Using 32-bit on a 64-bit capable PC limits your RAM usage to 4GB.
Related
General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.
More in this bed
- Set Up UPI Payments Through WhatsApp
- Pair Oppo Enco Earbuds with Android, iPhone & Windows
- Fix Administrator Account Disabled Error in Windows 11
- How to Play Kodi on Smart TV from PC
- Hogwarts Legacy Microsoft Visual C Runtime Error Fix
- Factory Reset on Samsung Galaxy: What It Erases