If you’re stuck in Safe Mode on Windows 10 and don’t know the password, you can still exit Safe Mode by using the built-in administrator account or by using Command Prompt from the login screen. This article explains exactly how to get back to normal mode, even if you’ve forgotten your password.
Why Windows 10 Gets Stuck in Safe Mode
Safe Mode is a diagnostic startup environment that loads only the essential drivers and services. Windows 10 can enter Safe Mode automatically after a crash, a failed update, or a hardware issue. Sometimes, it stays in Safe Mode because the system is configured to boot into it repeatedly, or because the user accidentally enabled it via the System Configuration tool (msconfig) and didn’t turn it off. When you’re at the login screen in Safe Mode, you might not see the usual network icon or the power options, and you might not remember the password for your regular account.
How Safe Mode and Passwords Work
Safe Mode in Windows 10 uses the same user accounts as normal mode, but it may show a hidden built-in administrator account that is disabled by default. If you’re asked for a password in Safe Mode, you’re seeing the standard login prompt. The built-in administrator account (often named “Administrator”) has no password by default, but it’s disabled unless you’ve enabled it. If you haven’t set a password on your normal account, you can just press Enter on the password field. If you have a Microsoft account, your password is the same as your email password, but if you’re offline, Windows may not accept it unless you’ve previously signed in with that password.
How to Exit Safe Mode Without a Password
Here are the methods to get out of Safe Mode, starting with the simplest:
Method 1: Restart Normally (If You Can Log In)
- If you can log in, click the Start button, then the Power icon, and select Restart. If Safe Mode was a one-time boot, this will take you back to normal mode.
- If it restarts into Safe Mode again, proceed to Method 2.
Method 2: Use Command Prompt from the Login Screen
- On the login screen, click the Power icon in the bottom-right corner.
- Hold down the Shift key on your keyboard and click Restart. This opens the Advanced Startup Options menu.
- Select Troubleshoot → Advanced options → Command Prompt.
- When the Command Prompt opens, type the following command and press Enter:
bcdedit /deletevalue {current} safeboot - Close the Command Prompt and click Continue to restart Windows normally.
Method 3: Use System Configuration (If You Can Reach the Desktop)
- If you can log in, press Win + R, type
msconfig, and press Enter. - Under the Boot tab, uncheck Safe boot.
- Click OK and restart your computer.
Method 4: Reset Your Password (If You’re Locked Out)
If you truly don’t know the password and can’t log in at all, you’ll need to reset it. You can do this using a password reset disk (if you created one earlier) or by using another administrator account. If you have another admin account, log in with that, then go to Settings → Accounts → Your info and change the password for the locked account. If you have no other admin account, you may need to reinstall Windows or use a third-party password reset tool, but those are outside the scope of this article.
Common Problems and Their Fixes
- Command Prompt doesn’t open: If you can’t get to the Command Prompt via Shift+Restart, you might need to boot from a Windows 10 installation USB and select “Repair your computer” to access the same options.
- bcdedit gives an error: Make sure you type the command exactly as shown. If you get “The boot configuration data store could not be opened,” run
cmdas administrator (right-click the Command Prompt shortcut and select “Run as administrator”). - Still boots into Safe Mode after the fix: Sometimes Safe Mode is triggered by an underlying problem (like a driver or a failing hard drive). If the system keeps crashing, it may re-enter Safe Mode. Check the Event Viewer for critical errors, or run a disk check (
chkdsk /f) from the Command Prompt. - Forgot the built-in Administrator password: The built-in Administrator account is usually disabled. If you’ve enabled it and set a password, you’ll need to reset it using another account or a password reset disk.
How to Prevent Getting Stuck in Safe Mode Again
- Always disable Safe Mode via msconfig after you’re done troubleshooting.
- Create a password reset disk for your local account (if you use a local account).
- Write down your Microsoft account password or use a password manager.
- Keep your system stable by updating drivers and running regular maintenance.
Alternatives to Safe Mode
If you’re stuck in Safe Mode because of a system issue, you might consider other recovery options:
- System Restore: Roll back your system to a previous restore point where everything worked.
- Startup Repair: This tool can fix boot problems automatically.
- Reset this PC: This reinstalls Windows while keeping your files (or removing them if you choose).
Frequently Asked Questions
Can I exit Safe Mode without a password if I have a Microsoft account?
Yes, but you need to know your Microsoft account password. If you’re offline, Windows may not accept it unless you’ve previously used it on that PC. You can also reset your Microsoft password online via another device, then use the new password to log in.
Why is my keyboard not working in Safe Mode?
Safe Mode loads minimal drivers, so some USB keyboards may not work. Try a different USB port, or use a PS/2 keyboard if you have one. You can also enable legacy USB support in BIOS.
What if I don’t see the Shift+Restart option?
If you’re on the login screen and the Power icon doesn’t show the Shift+Restart option, try pressing and holding Shift while clicking Restart. If that fails, force a restart three times in a row (press the power button to turn off, then on) to trigger the Automatic Repair screen, which gives you the same Advanced Options.
Will I lose my files if I reset my PC to exit Safe Mode?
If you choose “Keep my files,” your personal files are preserved, but installed apps and settings are removed. If you choose “Remove everything,” all files are deleted. Always back up important data before resetting.
Can I use Safe Mode with Networking to access the internet?
Yes, Safe Mode with Networking loads network drivers, so you can access the internet. However, if you’re stuck in regular Safe Mode, you won’t have network access. You can switch to Safe Mode with Networking by using msconfig and checking the “Network” box under Boot options.
Related
General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.
More in this bed
- Set a Google Play Budget & Stop Accidental Purchases
- Destiny 2 Error Code Anteater: Fixes & Causes
- View Android Photos on Chromebook: Step-by-Step
- Fix Windows Could Not Prepare the Computer to Boot
- Windows 11 Security Settings: Best Config Guide
- How to Clean Windows Outside: Step-by-Step Guide