If the UEFI Firmware Settings option is missing from Windows 10’s advanced startup options, you can usually still access the firmware by using a keyboard shortcut during boot or by changing a Windows setting. This article explains why the option disappears and provides several reliable methods to get into your UEFI/BIOS.
Why the UEFI Firmware Settings Option Is Missing
The UEFI Firmware Settings tile appears in Windows 10’s recovery environment only when the PC is booted in UEFI mode with Secure Boot enabled. If your system uses legacy BIOS (CSM) or has Secure Boot turned off, Windows hides the option because it cannot restart directly into the firmware. Other causes include a corrupted Boot Configuration Data (BCD), a fast startup glitch, or a motherboard that uses a non-standard UEFI implementation. The most common reason, however, is that the PC was originally installed in legacy BIOS mode, so the option is simply not available.
How to Access UEFI Firmware Settings from Windows
If the option is present, the normal path is:
- Open Settings > Update & Security > Recovery.
- Under Advanced startup, click Restart now.
- After the PC reboots, choose Troubleshoot > Advanced options > UEFI Firmware Settings > Restart.
If that option is missing, try the following methods.
Method 1: Use the Shift + Restart Shortcut
Hold the Shift key while clicking Restart in the Start menu. This forces Windows to boot into the recovery environment. If the UEFI option is still absent, the issue is likely that your system is not in UEFI mode. You can check this by running msinfo32 and looking at the “BIOS Mode” line – if it says “Legacy,” the UEFI option won’t appear.
Method 2: Use a Keyboard Shortcut During Boot
Most motherboards have a key you can press during the initial boot screen (before Windows loads) to enter the firmware setup. Common keys are Del, F2, F10, F12, or Esc. The exact key is usually displayed briefly on the screen during startup. If you miss it, restart and try again. This method works regardless of whether Windows shows the UEFI option.
Method 3: Boot from a Recovery Drive or Installation Media
If you cannot get into the firmware from Windows, boot from a Windows 10 installation USB or a recovery drive. When the installer loads, press Shift + F10 to open a command prompt, then run shutdown /r /fw. This command restarts the PC directly into the firmware interface. If the command fails, your system may not support UEFI, or the firmware is not configured to allow this.
Method 4: Check Your BIOS Mode and Secure Boot
If you want the UEFI option to appear in Windows, your system must be running in UEFI mode with Secure Boot enabled. You can verify this in System Information (msinfo32). If the BIOS mode is “Legacy,” you would need to convert the disk from MBR to GPT and enable UEFI in the firmware, which is a more advanced procedure that involves reinstalling or using tools like MBR2GPT. This is not recommended unless you are comfortable with disk partitioning.
Common Problems and Their Fixes
- Option appears but restart does nothing: Update your motherboard BIOS to the latest version, then try again.
- Option is grayed out: This usually means the firmware is not UEFI-compliant or Secure Boot is disabled. Enable Secure Boot in the firmware if possible.
- Fast Startup interferes: Disable Fast Startup in Control Panel > Power Options > Choose what the power buttons do, then restart.
- Corrupted BCD: Run
bootrec /rebuildbcdfrom a command prompt in the recovery environment to fix boot configuration issues.
Frequently Asked Questions
Why is UEFI Firmware Settings not showing in Windows 10?
It’s usually because your PC is using legacy BIOS mode (CSM) instead of UEFI. Windows only shows that option when it detects a UEFI boot with Secure Boot enabled. Check your BIOS mode in System Information.
Can I enter UEFI without the option?
Yes, use the motherboard’s boot key (often Del or F2) during startup. Alternatively, boot from installation media and run shutdown /r /fw in the command prompt.
How do I enable UEFI mode if it’s disabled?
You need to enter the firmware setup (using the boot key) and look for a setting called “Boot Mode,” “UEFI/Legacy,” or “CSM.” Switch it to UEFI, enable Secure Boot if available, and save changes. Be aware that this may prevent Windows from booting if the disk is MBR.
Will resetting the BIOS help?
Resetting the BIOS to defaults can sometimes restore the UEFI option if a misconfiguration caused it to disappear. Use the “Load Optimized Defaults” option in the firmware, but back up any custom settings first.
Does the UEFI option appear on all Windows 10 versions?
Yes, the option is part of Windows 10’s recovery environment across all editions, but it only appears when the system is UEFI-booted. If you’re on a very old version, update Windows first.
Related
General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.
More in this bed
- How to View Wi-Fi Password on iPhone
- How to Stream on Twitch from PC
- GTM vs Facebook Pixel: What’s the Difference?
- Windows 10 Won’t Boot? Fix It in 30 Minutes
- Ubuntu 26.04 LTS Requirements & Hardware Checks
- ATK0100 Driver: Do You Need to Install It?