sodcalculator

10 Tech How-To

Ventoy USB Won’t Boot: Fix UEFI, Secure Boot & GRUB Errors

Guide 10-57501 · Updated · Step by step

If your Ventoy USB drive won’t boot, the fix usually involves disabling Secure Boot, ensuring the USB is formatted as GPT with a FAT32 partition, and switching to GRUB2 mode in Ventoy’s configuration. This article walks through the exact steps to resolve UEFI boot failures, Secure Boot rejections, and GRUB errors like “error: unknown filesystem” or “invalid arch-independent ELF magic.”

Background: Why Ventoy Fails to Boot on UEFI Systems

Ventoy is a bootable USB tool that lets you copy multiple ISO files onto a single drive and choose which one to boot at startup. It works on both legacy BIOS and UEFI systems, but UEFI brings extra hurdles. Most modern PCs ship with Secure Boot enabled, which only allows operating system loaders signed by a trusted key. Ventoy’s default bootloader (GRUB2) is not signed by Microsoft, so Secure Boot blocks it before it even starts. Additionally, some motherboards have quirky UEFI implementations that only boot from GPT-formatted drives or require the FAT32 file system for the EFI partition. If your USB is formatted as MBR with NTFS, the UEFI firmware may ignore it entirely, leading to a black screen or a direct boot to your internal drive.

How Ventoy Boots: UEFI vs. Legacy BIOS

Ventoy creates two boot paths on the USB drive: one for legacy BIOS (using GRUB2 in MBR mode) and one for UEFI (using GRUB2 with an EFI executable). When you power on the PC, the firmware looks for a bootable device. In UEFI mode, it scans the EFI System Partition (ESP) for a file named BOOTX64.EFI. Ventoy places its own GRUB2 EFI loader there. If Secure Boot is on, the firmware checks the signature of that EFI file. Ventoy’s loader is not signed by Microsoft, so the firmware rejects it. In legacy BIOS mode, the firmware reads the first sector of the USB and executes the boot code, which then loads GRUB2 from the MBR. This path is not affected by Secure Boot, but it requires the USB to have a valid MBR boot record and the BIOS to be set to legacy/CSM mode.

Step-by-Step Fix: Disable Secure Boot and Set UEFI Mode

Before touching the USB, check your PC’s firmware settings. The fix almost always starts there.

  1. Restart the PC and press the key to enter BIOS/UEFI setup (commonly Del, F2, F10, or Esc).
  2. Find the Secure Boot option. It is usually under the “Boot” or “Security” tab. Set it to Disabled.
  3. Find the Boot Mode or UEFI/Legacy setting. Set it to UEFI (or “UEFI Only”). If you have a hybrid option, choose “UEFI First” or “UEFI with CSM” if you need legacy support.
  4. Save changes and exit (usually F10).
  5. If you still can’t boot, try disabling “Fast Boot” and “CSM” (Compatibility Support Module) entirely.

If you prefer to keep Secure Boot enabled, you can use Ventoy’s Secure Boot feature. Ventoy includes a signed MOK (Machine Owner Key) that you can enroll in the firmware. On first boot with Secure Boot on, you’ll see a blue screen (“Shim UEFI key management”) asking you to enroll a key. Select “Enroll key from disk,” navigate to ENROLL_THIS_KEY_IN_MOKMANAGER.cer on the Ventoy partition, and confirm. After that, Ventoy will boot with Secure Boot on, though some ISOs may still fail if they have their own bootloader issues.

Fixing GRUB Errors on Ventoy USB

GRUB errors are common when the ISO file is corrupted, the USB is not properly written, or the ISO uses an incompatible boot method. Here are the most frequent errors and their fixes:

  • “error: unknown filesystem” – This usually means GRUB cannot read the partition where the ISO resides. Reformat the USB with Ventoy (using the Ventoy2Disk tool) and copy the ISO again. Also check that the ISO file is not fragmented; Ventoy handles fragmentation, but extremely fragmented files can cause issues.
  • “invalid arch-independent ELF magic” – This occurs when GRUB tries to load a file that is not a valid executable. It often happens with ISOs that use a different bootloader (like Syslinux) or are hybrid ISOs. Try using Ventoy’s GRUB2 mode instead of the default. In the Ventoy boot menu, press Ctrl+r to switch to GRUB2 mode, then select the ISO.
  • “error: file not found” – The ISO path is wrong or the file name has special characters. Rename the ISO to something simple (letters, numbers, dashes) and place it in the root of the Ventoy partition.
  • “error: no suitable video mode found” – This is a display issue with GRUB’s graphical mode. In the Ventoy boot menu, press e to edit the GRUB entry, find the line starting with linux, and add vga=normal or nomodeset at the end. Then press Ctrl+x to boot.

How to Choose the Right Ventoy Configuration

Ventoy offers several configuration options that can affect bootability. The most important are:

  • Partition style: Ventoy2Disk lets you choose between MBR and GPT. For UEFI-only systems, GPT is recommended. For legacy BIOS, MBR is safer. If you need to boot on both old and new PCs, MBR with a FAT32 partition usually works, but GPT is the modern standard.
  • File system for the data partition: Ventoy defaults to exFAT, which is fine for most ISOs. However, some UEFI firmware cannot read exFAT. If you have boot issues, reformat the data partition to FAT32 (using the “Option” menu in Ventoy2Disk). The downside is FAT32 cannot store files over 4GB, which some Windows ISOs exceed. In that case, split the ISO or use NTFS, but note that NTFS may not be readable by all UEFI firmware.
  • Ventoy compatibility mode: In the Ventoy boot menu, pressing F1 shows a help screen. Pressing Ctrl+r toggles between normal mode and GRUB2 mode. Some ISOs (especially older Linux distros) boot better in GRUB2 mode.

Common Problems and Their Specific Fixes

Beyond Secure Boot and GRUB errors, other issues can prevent booting:

  • USB not recognized at all – Try a different USB port (preferably a USB 2.0 port on the back of the PC). Some UEFI firmware has issues with USB 3.0 during boot. Also, disable “USB Legacy Support” if it’s on, or enable it if it’s off.
  • Black screen after selecting ISO – This often happens with Linux ISOs that have graphics driver issues. Add nomodeset to the kernel command line (press e in the GRUB menu and edit the linux line). For Windows ISOs, ensure the ISO is not corrupted and that you are using a 64-bit version.
  • Boot loops back to firmware – The USB is not being detected as bootable. Re-run Ventoy2Disk with the “Install” option (not “Update”) to rebuild the bootloader. Also, check that the USB is not write-protected.
  • ISO boots but shows a message about missing drivers – This is common with Windows ISOs when the USB is in exFAT and the Windows setup cannot read it. Use FAT32 or NTFS instead, and make sure the ISO is a full installation media, not an upgrade-only ISO.

Ventoy vs. Other Tools: Why Use Ventoy?

Ventoy is not the only tool for creating multiboot USBs, but it is unique because it does not require extracting ISO contents. Tools like Rufus or Etcher write a single ISO to the drive, so you need a separate USB for each OS. Ventoy lets you copy ISO files directly, and it automatically creates a boot menu. This makes it ideal for IT professionals or enthusiasts who need a Swiss-army-knife USB. The trade-off is that Ventoy’s bootloader is more complex, which can trigger Secure Boot issues and occasional incompatibility with very old or exotic ISOs. If you only need to boot one ISO, Rufus is simpler and often more reliable. But for multiple ISOs, Ventoy is unmatched.

Cost and Safety Considerations

Ventoy is free and open-source. There is no cost to download or use it. The only “cost” is the time to troubleshoot if something goes wrong. Safety-wise, Ventoy is safe to use as long as you download it from the official GitHub repository or the official website. Be cautious of third-party downloads that may bundle malware. When using Ventoy2Disk, ensure you select the correct USB drive, as it will format the entire drive and erase all data. Double-check the drive letter before clicking “Install.” Also, remember that disabling Secure Boot reduces the security of your system, so only do it temporarily or if you trust the ISOs you are booting. After installing your OS, you can re-enable Secure Boot if you wish.

Frequently Asked Questions

Q: Why does my Ventoy USB boot fine on one PC but not another?
Different PCs have different UEFI firmware. One may have Secure Boot disabled by default, while another has it enabled. Also, some firmware only boots from GPT, others from MBR. Check the firmware settings on the failing PC and adjust the Ventoy partition style accordingly.

Q: Can I use Ventoy with Secure Boot enabled?
Yes, but you need to enroll the MOK key as described earlier. After enrolling, Ventoy will boot, but some ISOs may still fail if their own bootloaders are not signed. For those, you may need to disable Secure Boot temporarily.

Q: What does “error: invalid arch-independent ELF magic” mean and how do I fix it?
This error means GRUB is trying to load a file that is not a valid ELF executable. It often happens with ISOs that use a different bootloader. Switch to GRUB2 mode (Ctrl+r) in the Ventoy menu, or try a different ISO that is known to work with Ventoy.

Q: Why does my Windows ISO not show up in the Ventoy menu?
Ventoy should show all ISO files in the root of the data partition. If it doesn’t, the ISO may be in a subfolder. Ventoy does scan subfolders by default, but if you have disabled that in the configuration, move the ISO to the root. Also, ensure the file extension is .iso (not .img or .bin).

Q: Can I use a USB drive larger than 32GB with Ventoy?
Yes, Ventoy supports drives of any size. However, if you format the data partition as FAT32, you cannot store files larger than 4GB. Use exFAT or NTFS for large ISOs, but be aware that some UEFI firmware may not read those file systems. In that case, split the ISO or use a smaller drive.

Q: How do I update Ventoy without losing my ISO files?
Use the Ventoy2Disk tool and choose the “Update” option. This updates the bootloader without erasing the data partition. Your ISO files will remain intact. If you choose “Install,” it will erase the entire drive.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →