sodcalculator

10 Tech How-To

VPN Error 806 GRE Blocked on Windows: Fixes

Guide 10-47224 · Updated · Step by step

VPN error 806 on Windows means the GRE protocol (Generic Routing Encapsulation, protocol 47) is being blocked, so the VPN tunnel cannot establish. This guide explains why it happens and gives you step-by-step fixes, from checking your router to adjusting Windows Firewall rules.

What Is GRE and Why Does Error 806 Happen?

GRE is a tunneling protocol that wraps data packets inside other packets. Many older VPNs (especially PPTP-based ones) rely on GRE to carry traffic. When your ISP, router, or firewall blocks GRE (protocol 47), the VPN client can’t complete the tunnel, and Windows shows error 806: “The VPN connection between your computer and the VPN server could not be completed.”

This error is almost always a network-level block, not a problem with your Windows settings or credentials. The block can be on your local router, your ISP’s network, or the VPN server’s firewall.

Quick Checklist Before You Start

  • Confirm the VPN server actually supports PPTP or GRE (many modern servers don’t).
  • Try connecting from a different network (e.g., phone hotspot) to isolate the issue.
  • Check if your router has a setting called “PPTP Passthrough” or “GRE Passthrough” and enable it.
  • Make sure your Windows firewall isn’t blocking the VPN client (temporarily disable it to test).

Fix 1: Enable PPTP/GRE Passthrough on Your Router

Most home routers have a firewall that can block GRE. Log into your router’s admin page (usually 192.168.1.1 or 192.168.0.1) and look for:

  • Advanced > NAT > PPTP Passthrough
  • Security > VPN Passthrough
  • Firewall > GRE

Set these to “Enabled” or “Allow”. Save and reboot the router. If you don’t see these options, your router may not support GRE passthrough—consider a firmware update or a different router.

Fix 2: Adjust Windows Firewall for GRE

Windows Firewall can block GRE even if the VPN client is allowed. You need to add a rule for protocol 47 (GRE) in both inbound and outbound directions.

  1. Open Windows Security > Firewall & network protection > Advanced settings.
  2. Click Inbound Rules > New Rule….
  3. Choose Custom > All programs > Protocol type: GRE (47).
  4. Select Allow the connection and apply to all profiles.
  5. Repeat for Outbound Rules.

If you’re on a domain network, your IT policy might override local rules—contact your admin.

Fix 3: Check Your ISP’s GRE Blocking

Some ISPs block GRE to prevent VPN usage (especially in countries with restrictive internet policies). To test, try connecting from a mobile hotspot. If that works, your ISP is the culprit. Options:

  • Use a different VPN protocol (e.g., OpenVPN, WireGuard, or SSTP) that doesn’t rely on GRE.
  • Contact your ISP and ask if they block GRE—some will unblock it for business accounts.
  • Use a VPN service that offers obfuscated servers (these hide VPN traffic as normal HTTPS).

Fix 4: Use a VPN Protocol That Doesn’t Need GRE

If you can’t unblock GRE, switch to a protocol that uses UDP or TCP directly. Modern VPNs (OpenVPN, WireGuard, IKEv2) are more reliable and often faster. In Windows, you can set up:

  • IKEv2 – built into Windows, uses UDP 500 and 4500, usually passes firewalls better.
  • OpenVPN – uses TCP 443 or UDP 1194, very configurable.
  • WireGuard – uses UDP, extremely fast and simple.

Check with your VPN provider for setup guides—most offer multiple protocols.

Common Misconceptions About Error 806

“It’s a username/password problem.” No—error 806 is a network issue, not an authentication failure. If your credentials were wrong, you’d see error 691 or 734.

“Restarting the router always fixes it.” Only if the router’s NAT table is stale. If GRE is blocked by firmware or ISP, a reboot won’t help.

“Windows 10/11 doesn’t support PPTP anymore.” Windows still supports PPTP, but Microsoft has deprecated it for security reasons. Some third-party VPN clients may not include it.

Frequently Asked Questions

Can I fix error 806 without router access?

Yes, if you can’t change router settings, try using a different VPN protocol that doesn’t require GRE. Also, check if your VPN provider offers a client that uses SSTP (which uses HTTPS port 443) or OpenVPN—these are more likely to work on restrictive networks.

Does Windows 11 still support PPTP VPNs?

Yes, Windows 11 includes PPTP support, but it’s considered insecure. Microsoft recommends using IKEv2 or SSTP for better security. You can still create a PPTP connection manually, but it may be blocked by modern firewalls.

Why does error 806 happen on one network but not another?

Because the block is network-specific. Your home router or ISP may block GRE, while a coffee shop’s network might not. This is a strong clue that the issue is external to your PC.

Is it safe to disable Windows Firewall to fix this?

Temporarily, for testing, yes. But leaving it off exposes your PC to threats. Instead, add a specific GRE allow rule as described above, which is safer and still fixes the issue.

Will using a VPN with GRE blocked slow down my connection?

If GRE is blocked, the VPN won’t connect at all—no speed issue. If you switch to a different protocol, you might see slightly different speeds, but modern protocols like WireGuard are often faster than PPTP.

Can my antivirus block GRE?

Yes, some security suites include firewall features that block GRE. Check your antivirus’s firewall settings and add an exception for the VPN client and protocol 47.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →