sodcalculator

10 Tech How-To

Knowledge Graphs: What They Are & Legacy Software

Tag 10-54913 · Updated · Standard formula, shown below

Volume 9.26 yd³
Volume
250.0 ft³
Result
Lawn length
40 ft
You entered
Lawn width
25 ft
You entered
You enter
Lawn length, Lawn width, Depth
You get
Volume, Volume
Rounding
2 dp · 1 dp

Knowledge graphs organize data as a network of entities and their relationships, and they modernize legacy software by replacing rigid, siloed data models with a flexible, semantic layer that integrates new and old systems. This article explains what knowledge graphs are, how they work, and the concrete ways they help modernize legacy software, including practical steps and common pitfalls.

Formula

The calculator computes the volume of soil or sod needed for a rectangular lawn area. The formula is:

Volume (yd³) = (Length × Width × Depth) / 324

Where:

  • Length (ft) – the longer side of the lawn.
  • Width (ft) – the shorter side of the lawn.
  • Depth (in) – how deep you want the soil or how thick the sod layer is (usually 2–4 inches).

The divisor 324 converts cubic feet to cubic yards (since 1 yard = 3 feet, 1 yd³ = 27 ft³, and 12 inches = 1 foot, so 27 × 12 = 324).

Worked Example

Using the default values: Length = 40 ft, Width = 25 ft, Depth = 3 in.

  1. Multiply length by width: 40 × 25 = 1000 ft² (area).
  2. Multiply by depth in inches: 1000 × 3 = 3000 ft²·in.
  3. Divide by 324: 3000 / 324 = 9.26 yd³.

The calculator shows 9.26 yd³ (and 75 ft³, because 1000 × 3 / 12 = 250 ft³ – wait, check: 1000 × 3 = 3000, /12 = 250 ft³. The block says out ft3 = l * w * d / 12, which gives 250 ft³. The block’s default output for ft3 is 250.0, but the example above shows 75? Let me correct: 40*25*3/12 = 250. So the calculator shows 250 ft³. The example should match that.

So the correct worked example:

  1. Area = 40 × 25 = 1000 ft².
  2. Volume in cubic feet = 1000 × (3/12) = 250 ft³.
  3. Volume in cubic yards = 250 / 27 = 9.26 yd³.

The calculator gives 9.26 yd³ and 250 ft³.

When to Use This Calculator

Use this calculator when you need to order topsoil, garden soil, compost, or sod for a rectangular lawn or garden bed. It tells you the volume you need to purchase, which is how bulk materials are sold (by the cubic yard). For irregular shapes, break the area into rectangles and sum the volumes.

How to Read the Result

The first number (cubic yards) is what you’ll order from a landscape supplier. The second (cubic feet) is useful for smaller quantities or when buying bagged soil (bags are often 1–2 cubic feet). For example, 9.26 yd³ is about 250 ft³ – if you buy 2 ft³ bags, you’d need 125 bags.

Common Mistakes

  • Mixing units: Depth is in inches, but length/width are in feet. Always convert depth to feet (divide by 12) before multiplying.
  • Forgetting the 27: There are 27 cubic feet in a cubic yard, not 3. The formula already handles this, but if you calculate manually, don’t forget.
  • Rounding too early: Round only the final answer, not intermediate steps.

Limits of the Formula

This formula assumes a flat, rectangular area with uniform depth. Real lawns may have slopes, curves, or varying depths. It also doesn’t account for compaction – soil settles after watering, so you may want to add 5–10% extra. For sod, the depth is the thickness of the sod roll, typically 2–3 inches, but the volume of soil you need to add is usually zero if you’re just laying sod on existing soil.

Frequently Asked Questions

How many cubic feet are in a cubic yard?

There are 27 cubic feet in a cubic yard (3 feet × 3 feet × 3 feet). This is why the formula divides by 27 after converting depth to feet.

Can I use this for circular or irregular areas?

No, this is only for rectangles. For circles, use π × radius² for the area. For irregular shapes, divide into rectangles and add the volumes.

Should I order extra soil?

Yes, it’s wise to order 5–10% extra to account for compaction, settling, and uneven ground. For a 9.26 yd³ result, order about 10 yd³.

What depth do I need for a new lawn?

For topsoil over existing soil, 4–6 inches is typical. For sod, the sod itself is about 2–3 inches thick, but you don’t need to add soil unless you’re leveling.

How do I convert cubic yards to tons?

You need the density of the material. Topsoil weighs roughly 1,000–1,200 lbs per cubic yard, but it varies. Multiply cubic yards by the density (in lbs/yd³) and divide by 2,000 to get tons.

Related

Formula used
in l | Lawn length | ft | 40 | 0 | 100000
in w | Lawn width | ft | 25 | 0 | 100000
in d | Depth | in | 3 | 0 | 120
out yd | Volume | yd³ | l * w * d / 324 | 2
out ft3 | Volume | ft³ | l * w * d / 12 | 1

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.

More in this bed

The whole Tech How-To bed →