sodcalculator

10 Tech How-To

Which Browser Uses Least RAM?

Guide 10-48901 · Updated · Step by step

If you’re asking which browser uses the least RAM, the short answer is that Microsoft Edge with sleeping tabs enabled typically uses the least memory, followed closely by Brave and Opera, while Chrome and Firefox tend to use more. However, the real answer depends on your operating system, the number of tabs you keep open, and how each browser manages background processes. This guide breaks down how browser memory usage works, compares the major options, and shows you how to reduce RAM usage no matter which browser you choose.

How Browsers Use Memory

Modern browsers are built around multi-process architecture: each tab, extension, and plugin runs in its own separate process. This design improves stability and security—if one tab crashes, it doesn’t take down the whole browser—but it also increases memory consumption. Every process has its own overhead, so the more tabs and extensions you have, the more RAM the browser needs.

Browsers also use memory for caching, pre-rendering, and keeping background tabs alive. Some browsers, like Chrome, aggressively pre-load pages and keep processes running even after you close a tab, which can inflate memory usage. Others, like Edge and Brave, have built-in sleeping features that freeze inactive tabs, releasing their memory until you revisit them.

RAM Usage by Browser: What the Numbers Show

Independent tests and user measurements consistently show that Edge with sleeping tabs enabled uses the least RAM, often 30–40% less than Chrome under the same workload. Brave, which is built on Chromium (the same engine as Chrome), also performs well because it blocks trackers and ads by default, reducing the number of scripts that load and therefore the memory needed to process them.

  • Microsoft Edge – Lowest memory usage when sleeping tabs are on; also has a “Efficiency mode” that further reduces resource use.
  • Brave – Blocks ads and trackers by default, which cuts down on memory-hungry scripts.
  • Opera – Includes a built-in ad blocker and a “battery saver” that also helps with memory.
  • Chrome – High memory usage, especially with many tabs; but its “Memory Saver” feature (introduced in 2023) helps by discarding inactive tabs.
  • Firefox – Generally moderate memory use; it has a built-in “Multi-process” mode but no built-in tab sleeping (though you can add extensions).

It’s important to note that these comparisons are based on typical usage with a handful of tabs. The exact numbers vary with the sites you visit, the extensions you install, and your system’s memory management.

Why Chrome Uses So Much RAM

Chrome’s reputation for high memory usage is well-earned. Each tab, extension, and even some web components (like video players) get their own process. This “one process per tab” model is great for stability but terrible for memory efficiency. Chrome also pre-loads pages you might visit next, and it keeps background tabs active for a while even if you haven’t looked at them in hours.

Google has added a “Memory Saver” feature that puts inactive tabs to sleep, but it’s not enabled by default in all versions. When it is on, Chrome can reduce memory usage by up to 30%, but it still tends to use more than Edge or Brave because of its aggressive pre-rendering and background activity.

How to Measure Your Own Browser’s RAM Usage

Instead of relying on generic benchmarks, you can check how much memory your browser is using on your own machine. Here’s how:

  1. Open your browser and have a few typical tabs open (e.g., a video, a news site, a social media page).
  2. Open your operating system’s task manager. On Windows, press Ctrl+Shift+Esc; on macOS, open Activity Monitor (in Applications/Utilities); on Linux, use System Monitor.
  3. Sort the list by memory usage to see which processes belong to your browser. Note the total memory used by all browser processes.
  4. Repeat the same steps with a different browser, using the same tabs, to get a fair comparison.

This method gives you real numbers for your specific setup, which is more useful than any generic test.

How to Reduce RAM Usage in Any Browser

Regardless of which browser you choose, you can lower its memory footprint with these practical steps:

  • Enable tab sleeping or memory saver features – In Edge, turn on “Sleeping tabs”; in Chrome, enable “Memory Saver”; in Firefox, install an extension like “Auto Tab Discard”.
  • Remove unused extensions – Extensions run in the background and consume memory even when you’re not using them. Keep only the ones you really need.
  • Use fewer tabs – Bookmark pages you want to revisit and close the rest. Each open tab is a separate process.
  • Disable pre-loading – In Chrome and Edge, turn off “Preload pages” or “Preload websites” in settings to stop the browser from loading pages in advance.
  • Use a content blocker – Ad blockers and tracker blockers reduce the number of scripts that load, which lowers memory usage. Brave has this built-in; for other browsers, install a reputable blocker.
  • Restart your browser regularly – Over time, memory leaks can cause a browser to consume more RAM. A fresh start clears that out.

Common Misconceptions About Browser RAM

One common myth is that “incognito mode” uses less memory. In reality, incognito mode only stops saving history and cookies; it doesn’t change how many processes run, so memory usage is about the same. Another misconception is that a 64-bit browser always uses more RAM than a 32-bit one. While 64-bit browsers can address more memory, they are also more efficient at handling large tasks, so the difference is negligible for typical browsing.

People also assume that closing a tab immediately frees all its memory. In many browsers, the process stays alive for a short time to speed up reopening the tab. That’s why you might see memory usage stay high for a few seconds after closing a tab.

Which Browser Should You Choose?

If your main priority is minimal RAM usage, go with Microsoft Edge (with sleeping tabs enabled) or Brave. Edge is a good choice for Windows users because it’s pre-installed and integrates well with the OS. Brave is ideal if you want built-in ad blocking and privacy features without extra extensions. If you prefer Firefox’s customization, you can make it memory-efficient by adding a tab discard extension and disabling pre-fetching.

If you’re on a Mac, Safari is also worth considering—it’s optimized for Apple’s hardware and often uses less memory than Chrome or Firefox. However, Safari is only available on macOS and iOS, so it’s not an option for Windows or Linux users.

Ultimately, the “least RAM” browser is the one that you configure properly. Even Chrome can be made reasonably efficient with its Memory Saver feature and a few settings tweaks.

Frequently Asked Questions

Does Firefox use less RAM than Chrome?

In most tests, Firefox uses slightly less RAM than Chrome, but the difference is small. Firefox’s multi-process mode is less aggressive than Chrome’s, but it also doesn’t have a built-in tab sleeping feature, so with many tabs open, Firefox can end up using more. You can add an extension like “Auto Tab Discard” to make Firefox more efficient.

Is it true that Edge is just Chrome with a different skin?

Edge is built on the same Chromium engine as Chrome, so it renders websites the same way and supports the same extensions. However, Microsoft has added its own features like sleeping tabs, efficiency mode, and a different user interface. These features make Edge more memory-efficient than stock Chrome.

Will using an ad blocker reduce RAM usage?

Yes, ad blockers reduce the number of scripts and trackers that load on a page, which directly reduces memory usage. That’s why Brave, which blocks ads by default, often uses less RAM than Chrome. However, some ad blockers themselves can be memory-hungry, so choose a lightweight one.

How much RAM do I need for smooth browsing?

For basic browsing with a few tabs, 4GB of RAM is enough, but 8GB is recommended for comfortable multitasking. If you keep dozens of tabs open or use heavy web apps like Google Docs or video editors, 16GB or more will help avoid slowdowns. The browser’s memory usage is only one factor—your operating system and other apps also need RAM.

Can I make Chrome use less RAM without switching browsers?

Yes. Enable the “Memory Saver” feature in Chrome (Settings > Performance > Memory Saver). Also, remove unused extensions, disable pre-loading, and use a tab suspender extension like “The Great Suspender” (though that particular extension has had security issues, so look for a well-reviewed alternative).

Why does my browser use more RAM than the task manager shows?

Task managers often group processes under the browser’s name, but some background processes (like GPU or network services) may be listed separately. Also, the browser may be using memory for cached files that are not immediately visible. To get a full picture, look at the total memory used by all processes that include the browser’s name.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →