sodcalculator

10 Tech How-To

Windows 0x800704b3 Network Error: Fixes

Guide 10-44655 · Updated · Step by step

The Windows 0x800704b3 error is a network-related failure that typically appears when Windows cannot complete a network operation, often during file sharing, printer access, or when mapping a network drive. The fix usually involves resetting the network stack, checking the SMB 1.0/CIFS settings, or verifying that the required network services are running. Below are the most effective solutions, explained step by step.

What Causes Error 0x800704b3?

This error code translates to “ERROR_NO_NETWORK” or “The network cannot be reached,” which means Windows attempted to communicate with another device on the network but the connection failed. Common triggers include:

  • Outdated or corrupted network drivers
  • Windows Firewall or third-party security software blocking the connection
  • Network discovery and file sharing turned off
  • Incorrect IP configuration or DNS issues
  • Server Message Block (SMB) protocol disabled or misconfigured
  • Network services like “Function Discovery” or “TCP/IP NetBIOS Helper” stopped

The error can appear when trying to access a shared folder on another PC, connect to a network printer, or even during Windows Update in some cases. The exact context matters because the fix differs slightly for each scenario.

Check Network Services First

Many 0x800704b3 errors are caused by essential Windows services not running. Open the Services app by pressing Win + R, typing services.msc, and pressing Enter. Look for the following services and ensure they are set to “Automatic” and are currently “Running”:

  • Function Discovery Provider Host
  • Function Discovery Resource Publication
  • SSDP Discovery
  • UPnP Device Host
  • TCP/IP NetBIOS Helper
  • Server
  • Workstation

If any of these are stopped, right-click and select “Start.” To make the change permanent, double-click each service, set the Startup type to “Automatic,” and click Apply. After starting all services, restart your PC and try the network operation again.

Reset the Network Stack

A corrupted network stack is a frequent culprit. Windows includes a set of command-line tools to reset it. Open Command Prompt as Administrator (search “cmd,” right-click, and select “Run as administrator”) and run the following commands one by one:

  1. netsh winsock reset – resets the Windows Sockets catalog
  2. netsh int ip reset – resets the IP configuration
  3. ipconfig /release – releases the current IP address
  4. ipconfig /renew – obtains a new IP address from the DHCP server
  5. ipconfig /flushdns – clears the DNS cache

After running these, restart your computer. This fix resolves many transient network errors, including 0x800704b3, especially if the error appeared suddenly after a network change.

Enable SMB 1.0/CIFS (If Needed)

Older network devices, such as legacy NAS drives or Windows 7 PCs, may require the SMB 1.0 protocol, which is disabled by default in modern Windows versions. If the error occurs when connecting to an older device, enabling SMB 1.0 might help. Go to Control Panel > Programs > Turn Windows features on or off, then check the box for “SMB 1.0/CIFS File Sharing Support.” Click OK and restart.

However, SMB 1.0 is a security risk and is no longer supported by Microsoft. Only enable it if you are certain the target device requires it, and consider upgrading the device firmware or replacing it if possible. If the error happens with a modern device, SMB 1.0 is not the issue.

Update or Reinstall Network Drivers

Outdated or corrupted network drivers can cause the 0x800704b3 error. To update, open Device Manager (right-click Start and select “Device Manager”), expand “Network adapters,” right-click your network adapter, and select “Update driver.” Choose “Search automatically for drivers.” If Windows finds nothing, visit your PC or motherboard manufacturer’s website to download the latest driver manually.

If the error persists, try uninstalling the driver and restarting. Windows will reinstall it automatically. To do this, right-click the adapter, select “Uninstall device,” check “Delete the driver software for this device” if available, and click Uninstall. Then restart your PC.

Check Firewall and Security Software

Windows Firewall or third-party antivirus can block network discovery and file sharing. Temporarily disable your third-party firewall or antivirus to test if it is the cause. If the error disappears, add an exception for the specific program or network type.

For Windows Firewall, go to Control Panel > System and Security > Windows Defender Firewall, click “Allow an app or feature through Windows Defender Firewall,” and ensure “File and Printer Sharing” is checked for both Private and Public networks. Also, verify that “Network Discovery” is enabled in the Network and Sharing Center.

Verify Network Profile and Sharing Settings

Windows treats networks as either “Private” or “Public.” File sharing is disabled by default on public networks. To check, go to Settings > Network & Internet > Wi-Fi or Ethernet, click on your connected network, and set the network profile to “Private.” Then go to Control Panel > Network and Sharing Center > Advanced sharing settings and turn on “Network discovery” and “File and printer sharing” for the Private profile.

If you are trying to access a shared folder on another PC, ensure that the folder is actually shared and that the target PC has the correct permissions. Right-click the folder, select “Properties,” go to the “Sharing” tab, and click “Share.” Add the user account you are using and set the permission level to “Read” or “Read/Write.”

Frequently Asked Questions

Does this error affect Windows 11 and Windows 10 the same way?

Yes, the 0x800704b3 error occurs on both Windows 10 and Windows 11, and the troubleshooting steps are nearly identical. The Services app, Device Manager, and Command Prompt commands work the same in both versions. The only difference may be the location of some settings in the newer Settings app, but the underlying causes and fixes are the same.

Can this error appear during Windows Update?

Yes, though less common, 0x800704b3 can appear during Windows Update if the network connection drops or if the update service cannot reach Microsoft’s servers. The same network reset steps often resolve it. Additionally, you can run the Windows Update Troubleshooter from Settings > System > Troubleshoot > Other troubleshooters.

Is there a way to fix this without restarting my PC?

Some fixes, like starting services or changing sharing settings, take effect immediately without a restart. However, a restart is recommended after resetting the network stack or updating drivers, as it ensures all changes are fully applied. If you cannot restart immediately, try the other steps first and see if the error clears.

What if none of these fixes work?

If the error persists after trying all steps, the issue may be with the network itself (router, switch, or cable) or with the remote device. Test connectivity to other devices on the network. You can also run sfc /scannow in an elevated Command Prompt to repair system files. As a last resort, perform a network reset via Settings > Network & Internet > Advanced network settings > Network reset, which removes and reinstalls all network adapters.

Is it safe to enable SMB 1.0 to fix this error?

Enabling SMB 1.0 is not recommended because it is outdated and has known security vulnerabilities. Only enable it if you are certain the device you are connecting to requires it, and even then, consider replacing that device. If you must enable it, do so temporarily and disable it after the connection is established.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →