Epson error code 0x97 indicates a fatal firmware or hardware fault that stops the printer from operating. The fix usually involves power cycling, checking for paper jams, and if the error persists, performing a firmware reset or contacting Epson support for service. Below is a detailed troubleshooting guide to help you resolve this error.
What Does Error Code 0x97 Mean?
Error code 0x97 is a generic internal error that appears on many Epson inkjet printers, including EcoTank, WorkForce, and Expression models. It is often accompanied by a message like “Printer error – Turn the printer off and on again” or simply “Error Code 0x97.” This code indicates that the printer’s firmware has detected an abnormal condition, such as a hardware malfunction, a stuck internal component, or a communication failure between the main board and other parts.
Unlike simple paper jams or low ink warnings, 0x97 is not user-serviceable in most cases. It can be triggered by a power surge, a corrupted firmware update, a foreign object inside the printer, or a failed internal part like the print head carriage or the waste ink pad counter.
Preliminary Checks and Power Cycle
Before diving into complex fixes, perform these basic steps. They resolve a surprising number of 0x97 errors:
- Turn off the printer using the power button.
- Unplug the power cord from the wall outlet and from the printer.
- Wait at least 60 seconds (to discharge internal capacitors).
- Plug the printer back in and turn it on.
If the error persists, try a deeper power reset: with the printer off, hold the power button for 15 seconds while unplugging it. Then plug it in and turn it on. This clears static charges that can sometimes confuse the firmware.
Check for Paper Jams and Obstructions
A common cause of 0x97 is a piece of paper or a foreign object stuck in the paper path. Open the front and rear access panels (if available) and look for:
- Wrinkled or torn paper fragments.
- Staples, paper clips, or small debris.
- Anything that might block the print head carriage from moving.
Gently remove any obstruction. Do not use excessive force, as you may damage rollers or sensors. Also check the ink cartridge access area – a cartridge that is not seated properly can cause the carriage to jam and trigger the error.
Firmware Reset or Reinstall
If the basic steps fail, the error may be due to corrupted firmware. Epson occasionally releases firmware updates that fix known bugs. You can try updating the printer’s firmware via the Epson Support website or using the Epson Software Updater tool (Windows) or Epson Firmware Updater (Mac).
Some users report success with a “factory reset” via the printer’s menu: go to Setup > Restore Default Settings (the exact path varies by model). This clears user settings and may clear the error flag. However, if the error is hardware-related, a reset won’t help.
Important: Do not attempt to install unofficial firmware or use “reset tools” from third-party websites. These can permanently brick your printer and void any warranty.
When to Contact Epson Support
If the error persists after all troubleshooting steps, it is likely a hardware failure. Contact Epson technical support or an authorized service center. Provide them with your printer model and the error code. They may ask you to run a diagnostic test or request the printer for repair.
If your printer is under warranty, the repair may be free. If not, you’ll need to weigh the cost of repair against buying a new printer. For many models, a service fee can be close to the price of a new unit.
Preventing Future 0x97 Errors
While not all causes are preventable, you can reduce the risk:
- Use a surge protector to protect against power spikes.
- Do not unplug the printer while it is printing or during a firmware update.
- Keep the printer clean and free of dust and debris.
- Use genuine Epson ink and paper to avoid jams and carriage issues.
- Turn off the printer properly using the power button, not by pulling the plug.
Frequently Asked Questions
Can I fix error 0x97 myself?
Sometimes yes. Power cycling, checking for paper jams, and updating firmware can resolve it. If those fail, the issue is likely hardware and requires professional service.
Will resetting the printer erase my settings?
Yes, a factory reset will restore all settings to defaults, including network settings and print preferences. You’ll need to reconfigure them afterward.
Is error 0x97 covered under warranty?
If the printer is within its warranty period and the error is not due to misuse, Epson will typically repair or replace it free of charge. Contact support for details.
How long does Epson support take to fix this error?
It varies. If you ship the printer to a service center, it can take 1-3 weeks. If you take it to a local authorized service provider, it may be faster.
Can I use a third-party reset tool to clear the error?
It is not recommended. These tools are unofficial, may not work, and can damage the printer or void the warranty. Stick to official Epson methods.
Related
General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.
More in this bed
- How to Create App Shortcuts in Windows 10 Start Menu
- How to Rename a SQL Server Database
- Fix Google Calendar Not Syncing on iPhone
- Fix Skype Microphone Not Working on Windows
- Google Docs Landscape: Change Page Orientation
- Recover Deleted Admin Account in Windows 11