If your Epson scanner is not working in Windows 10, the fix usually involves reinstalling the driver, restarting the Windows Image Acquisition (WIA) service, or resetting the scanner’s connection. Below is a step-by-step guide that covers the most common causes and solutions, from simple cable checks to driver reinstallation.
Why Your Epson Scanner Stops Working
Epson scanners (including all-in-one printers) rely on a driver and a Windows service called Windows Image Acquisition (WIA). Windows 10 updates, leftover drivers from a previous installation, or a corrupted USB port can break this chain. The most common symptoms are:
- Scanner not detected when you open the Epson Scan software.
- Windows reports “Scanner not found” or “Device unavailable.”
- The scanner works in one app but not another (e.g., works in Epson Scan but not in Windows Fax and Scan).
- The scanner appears in Device Manager with a yellow exclamation mark.
Before diving into driver reinstallation, try the quick fixes below—they solve about half of all cases.
Quick Checks: Cables, Power, and Ports
- Check the USB cable: Use a different USB cable if possible. Many Epson scanners use a USB-B (square) connector; a damaged or low-quality cable can cause intermittent detection.
- Try a different USB port: Prefer a port directly on the computer (not a hub). If you have both USB 2.0 and USB 3.0 ports, try both.
- Power cycle the scanner: Turn off the scanner, unplug it for 30 seconds, then plug it back in and turn it on. This clears the scanner’s internal buffer.
- Check the scanner’s power light: If it’s blinking, the scanner may be in an error state (e.g., a paper jam or locked carriage). Open the lid and check for obstructions.
- Restart Windows: A simple restart often reinitializes the WIA service and USB stack.
Restart the Windows Image Acquisition (WIA) Service
Windows 10 uses the WIA service to communicate with scanners. If this service stops or gets stuck, the scanner won’t be recognized even if the driver is fine.
- Press Win + R, type
services.msc, and press Enter. - Scroll down to Windows Image Acquisition (WIA).
- Right-click it and select Restart.
- If the service is set to Manual, change it to Automatic (right-click → Properties → Startup type → Automatic).
- Close the window and try scanning again.
Reinstall the Epson Scanner Driver
If the service restart doesn’t help, the driver itself is likely corrupted or outdated. Windows 10 sometimes installs a generic driver that lacks full Epson functionality.
- Uninstall the current driver: Go to Settings → Apps → Apps & features, find any Epson scanner/printer software, and uninstall it. Also remove the device from Device Manager (right-click the scanner under “Imaging devices” → Uninstall device).
- Download the latest driver: Visit Epson’s official support site, enter your scanner model, and download the Windows 10 driver. Avoid third-party download sites—they often bundle outdated or adware-laden versions.
- Install the driver: Run the downloaded file as Administrator (right-click → Run as administrator). Follow the on-screen prompts; connect the scanner only when instructed.
- Restart your PC after installation.
If the scanner still isn’t detected, try using Epson Scan 2 (the modern replacement for the older Epson Scan). Some older models only work with Epson Scan 2 on Windows 10.
Use Windows Troubleshooter and Device Manager
Windows 10 has a built-in troubleshooter that can detect and fix scanner issues automatically.
- Go to Settings → Update & Security → Troubleshoot → Additional troubleshooters.
- Select Hardware and Devices and run the troubleshooter.
- Open Device Manager (right-click Start → Device Manager).
- Look under Imaging devices or Universal Serial Bus controllers. If you see a yellow exclamation mark, right-click the device → Update driver → Search automatically.
If Windows says the best driver is already installed, try Uninstall device and then Scan for hardware changes (under the Action menu). This forces Windows to re-enumerate the scanner.
Check for Windows 10 Updates and Epson Firmware
Windows 10 feature updates sometimes break scanner drivers. Conversely, Epson releases firmware updates that improve compatibility.
- Windows updates: Go to Settings → Update & Security → Windows Update and check for updates. Install any pending updates, then restart.
- Epson firmware: Use the Epson Software Updater (installed with the driver) to check for firmware updates. If you don’t have it, download it from Epson’s site.
After updating, repeat the driver reinstallation if the scanner still fails.
Frequently Asked Questions
Why does my Epson scanner work in Epson Scan but not in Windows Fax and Scan?
This usually means the WIA driver is missing or outdated. Windows Fax and Scan uses the WIA driver, while Epson Scan uses its own proprietary driver. Reinstall the full Epson driver package (which includes the WIA driver) and restart the WIA service as described above.
My scanner is detected but shows “Device Busy” or “Scanner is in use.”
Another application may have the scanner locked. Close all programs that might use the scanner (Epson Scan, Windows Fax and Scan, Adobe Acrobat, etc.). If that doesn’t work, restart the WIA service or reboot the PC.
Do I need to uninstall the old driver before installing a new one?
Yes, especially if you’re upgrading from Windows 7 or 8. Old drivers can conflict with Windows 10. Uninstall the old software, remove the device from Device Manager, then install the fresh driver.
Can I use a third-party scanning app instead of Epson Scan?
Yes. Windows 10’s built-in Windows Scan app (from the Microsoft Store) works with most WIA-compatible scanners. NAPS2 and VueScan are popular alternatives, but they may require a paid license for advanced features.
My Epson scanner is connected via Wi-Fi but won’t scan. What should I do?
First, verify the scanner is on the same network as your PC. Print a network status sheet from the scanner’s control panel. Then reinstall the driver and choose the network connection option during setup. Also, make sure your firewall isn’t blocking the scanner’s ports (usually 9100 for printing and 1865 for scanning).
Why does my scanner work after a restart but fail later?
This often points to a power management issue. Go to Device Manager → Imaging devices → your scanner → Properties → Power Management and uncheck “Allow the computer to turn off this device to save power.” Also check the USB hub’s power management settings.