sodcalculator

10 Tech How-To

iPhone Speaker Not Working on Calls? Fixes

Guide 10-54667 · Updated · Step by step

If your iPhone speaker isn’t working during calls, the fix is usually a quick settings check or a simple cleaning—not a trip to the repair shop. This guide walks you through the most common causes and the exact steps to restore call audio, from toggling the speaker button to clearing debris from the earpiece.

Why Call Audio Stops Working

iPhone call audio relies on two separate speakers: the earpiece (the small grille at the top of the screen) for private listening, and the bottom speaker (next to the charging port) for speakerphone. When you hear nothing, the problem is often one of these:

  • Software glitch: A temporary bug in iOS or the Phone app can mute audio.
  • Blocked earpiece: Dust, pocket lint, or a poorly applied screen protector can clog the tiny mesh.
  • Bluetooth routing: Your iPhone may be sending audio to a connected device you didn’t intend.
  • Settings misconfiguration: Do Not Disturb, Silence Unknown Callers, or a low volume setting can interfere.
  • Hardware damage: Water exposure or a drop can physically damage the speaker components.

Quick Fixes to Try First

Start with these steps—they resolve most software-related audio issues in under a minute.

  1. Toggle the speaker button: During a call, tap the speaker icon (a small speaker shape) in the call interface. If it’s gray, tap it to turn it blue. If it’s already blue, tap it off and on again.
  2. Check the volume: Press the volume up button on the left side of your iPhone during the call. You should see a volume slider on the screen. Make sure it’s at least halfway up.
  3. Turn off Bluetooth: Swipe down from the top-right corner to open Control Center, tap the Bluetooth icon to disconnect any paired devices, then try the call again.
  4. Restart your iPhone: Press and hold the side button and either volume button until the power-off slider appears, then slide to power off. Wait 30 seconds, then turn it back on.

Clean the Earpiece and Speaker Grilles

If the quick fixes don’t work, the most likely culprit is debris. The earpiece mesh is tiny—about 1mm wide—and can easily get clogged with everyday pocket lint or dust. Here’s how to safely clean it:

  • Use a soft-bristled brush: A clean, dry, soft toothbrush or a small craft brush works well. Gently brush across the earpiece grille and the bottom speaker grille in short strokes.
  • Try a wooden toothpick (carefully): If you see visible debris, you can very gently scrape it out with a clean, dry toothpick. Do not use metal objects, and never insert anything deeper than 1-2mm.
  • Do NOT use compressed air: The force can push debris further into the speaker or damage the delicate membrane.
  • Avoid liquids: Do not use alcohol, water, or cleaning sprays. They can damage the internal components.

Check iOS Settings That Mute Calls

Sometimes the issue isn’t the speaker—it’s a setting that’s accidentally been turned on. These are the most common culprits:

  • Do Not Disturb or Focus: If you have a Focus mode enabled (like Do Not Disturb), it can silence calls from everyone except your Favorites or repeated callers. Go to Settings > Focus and check if any mode is active.
  • Silence Unknown Callers: This feature sends calls from unknown numbers straight to voicemail. If you’re testing with a number not in your contacts, it won’t ring. Go to Settings > Phone > Silence Unknown Callers and toggle it off.
  • Change the Ringtone and Vibration: While this doesn’t affect in-call audio, a silent ringtone can make you miss calls entirely. Go to Settings > Sounds & Haptics and make sure the ringtone isn’t set to “None.”

Bluetooth and Audio Routing Issues

Your iPhone might be sending audio to a Bluetooth device you forgot was connected—like a car stereo, wireless earbuds, or a smart speaker. This is a common reason why you hear nothing from the phone’s own speaker.

  1. Check Control Center: Swipe down from the top-right corner. If the Bluetooth icon is blue, tap it to turn it off entirely. This disconnects all devices.
  2. Forget a specific device: If you want to keep Bluetooth on but stop a specific device from auto-connecting, go to Settings > Bluetooth, tap the “i” next to the device, and choose “Forget This Device.”
  3. Check the call’s audio source: During a call, tap the “Audio” button (it looks like a speaker with waves). A menu will appear showing all available audio outputs. Tap “iPhone” to force audio back to the earpiece or speaker.

When It’s a Hardware Problem

If you’ve tried all the software fixes and cleaning, and the speaker still doesn’t work, it may be a hardware issue. Common causes include:

  • Water damage: Even if your iPhone is water-resistant, the speaker mesh can corrode or the internal connection can fail after exposure to moisture.
  • Physical impact: A drop can loosen the internal cable connecting the speaker to the logic board.
  • Manufacturing defect: In rare cases, a speaker component can fail on its own.

What to do: Before seeking repairs, back up your iPhone. Then, contact Apple Support or visit an Apple Store or Authorized Service Provider. They can run diagnostic tests to confirm whether the speaker is faulty. If your iPhone is under warranty or AppleCare+, the repair may be covered. For out-of-warranty repairs, you’ll get a cost estimate before any work is done.

How to Test Your Speakers

To determine if both speakers are working, you can run a quick test without making a call:

  1. Open the Voice Memos app (or any app that plays audio).
  2. Play a recording or a song. You should hear sound from the bottom speaker.
  3. Make a FaceTime call (or a regular call) and put it on speaker. You should hear sound from the earpiece speaker as well as the bottom speaker.

If you only hear sound from one speaker, the other is likely blocked or damaged. If you hear no sound at all, the issue is likely with the audio routing or the main speaker amplifier.

Frequently Asked Questions

Why can I hear the other person but they can’t hear me?

This is usually a microphone issue, not a speaker issue. The microphone is at the bottom of the phone (next to the charging port) and can also get clogged. Try cleaning it gently with a dry brush, and check if you’re covering it with your finger or case. Also, make sure the mute button (the icon with a crossed-out microphone) is not enabled during the call.

My speaker works for music but not for calls. Why?

This is a classic sign of a clogged earpiece speaker. Music plays through the bottom speaker, while calls use the earpiece speaker. If the earpiece is blocked by debris, you’ll hear nothing during calls but music will sound fine. Clean the earpiece grille as described above.

Will a factory reset fix the speaker?

Only if the issue is caused by a software bug that persists through other fixes. A factory reset erases all settings and data, so it’s a last resort. Before doing this, back up your iPhone. If the problem is hardware-related, a reset won’t help.

Why does my iPhone say “Call Failed” when I try to make a call?

This is separate from the speaker issue. It usually indicates a network problem, no signal, or a problem with your carrier. Check your signal strength, try toggling Airplane Mode on and off, or restart your iPhone. If the problem continues, contact your carrier.

Can I use a third-party app to fix the speaker?

No. There is no app that can physically fix a blocked or damaged speaker. Some apps claim to “clean” speakers by playing high-frequency tones, but these are not proven to be effective and could potentially damage the speaker if played at high volume. Stick to physical cleaning and software settings.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →