This guide shows you how to enable 5G on your iPhone so you can take advantage of faster download and upload speeds, lower latency, and a more responsive connection. You’ll need an iPhone model that supports 5G (iPhone 12 or later) and a carrier plan that includes 5G access. The steps below work for current iOS versions (iOS 16 and later), though the exact menu names may vary slightly.
What You’ll Need
- An iPhone 12 or newer (all models support 5G, including the SE 3rd generation).
- A carrier plan that includes 5G. Most major carriers include it by default, but some prepaid plans may require an add-on.
- An active SIM or eSIM that is provisioned for 5G. If you’re not sure, contact your carrier.
- iOS 16 or later for the most straightforward steps. Older iOS versions have similar settings but slightly different wording.
Step-by-Step
- Open Settings. Tap the gray gear icon on your home screen.
- Tap “Cellular” (or “Mobile Data” if you’re outside the U.S.). This is where all your network settings live.
- Tap “Cellular Data Options” (or “Mobile Data Options”). You’ll see this directly under your cellular plan name.
- Tap “Voice & Data.” This menu controls which network types your iPhone can use.
- Select “5G Auto” or “5G On.”
- 5G Auto: The iPhone automatically switches to 5G when it won’t significantly reduce battery life. This is the recommended default for most people.
- 5G On: The iPhone always uses 5G when available, even if it drains battery faster. Use this if you prioritize speed over battery life.
- Go back one screen and check “Data Mode.” If you want to allow more data usage for higher-quality video and FaceTime, tap “Data Mode” and select “Allow More Data on 5G.” This isn’t required to turn on 5G, but it enhances the experience.
- Exit Settings. Your iPhone will apply the change automatically. Look at the status bar: you should see a “5G” icon (or “5G+” on some carriers) when you’re in a 5G coverage area.
Common Mistakes
- Not checking your carrier plan. Even if your iPhone supports 5G, your plan must include it. Some prepaid or older unlimited plans don’t include 5G by default.
- Confusing “5G Auto” with “5G Off.” “5G Auto” is not the same as “5G Off.” “5G Off” forces LTE and disables 5G entirely. Make sure you select “5G Auto” or “5G On.”
- Assuming 5G is available everywhere. 5G coverage is still expanding, especially in rural areas. If you’re not in a 5G zone, your iPhone will automatically fall back to LTE.
- Forgetting to update iOS. Older iOS versions may have different menu names or missing options. Go to Settings > General > Software Update to ensure you’re on the latest version.
- Not restarting after a change. If you toggled settings and don’t see 5G, a quick restart often forces the iPhone to re-register with the network.
Tips
- Use 5G Auto for battery life. 5G can drain battery faster than LTE, especially in areas with weak signal. “5G Auto” balances speed and battery.
- Enable “Allow More Data on 5G” for video. This setting lets FaceTime, streaming, and downloads use more data, resulting in higher-quality video and faster downloads. It’s off by default to save data.
- Check your carrier’s coverage map. If you rarely see 5G, check your carrier’s coverage map to confirm you’re in a 5G area. Sometimes 5G is only available in specific cities or neighborhoods.
- Toggle Airplane Mode to refresh the connection. If you’re in a 5G area but don’t see the icon, turn on Airplane Mode for a few seconds, then turn it off. This forces your iPhone to reconnect to the network.
- Know the difference between 5G and 5G+ (or 5G UW/UC). Some carriers show a special icon for their fastest 5G bands (like mmWave). This is normal and doesn’t require any action on your part.
Troubleshooting
If you’ve followed the steps but still don’t see 5G, try these in order:
- Restart your iPhone. Press and hold the side button and either volume button until the power off slider appears. Slide to power off, wait 30 seconds, then power back on.
- Toggle Airplane Mode. Swipe down from the top-right corner to open Control Center, tap the airplane icon, wait 10 seconds, then tap it again.
- Check for carrier settings update. Go to Settings > General > About. If a carrier update is available, you’ll see a prompt to install it. If not, you’ll see a message that your carrier settings are up to date.
- Reset network settings. Go to Settings > General > Transfer or Reset iPhone > Reset > Reset Network Settings. This clears saved Wi-Fi passwords and Bluetooth connections, so only do this if you’re comfortable reconnecting them.
- Remove and reinsert your SIM card. Use a SIM ejector tool (or a paperclip) to pop out the SIM tray, remove the SIM, wait a few seconds, then reinsert it. If you use eSIM, skip this step.
- Contact your carrier. If none of the above works, your carrier may need to provision 5G on your line, or there may be an outage in your area. Call them or check their website for status updates.
Frequently Asked Questions
Why don’t I see the 5G option in Settings?
If you don’t see “Voice & Data” or “5G” at all, your iPhone likely doesn’t support 5G (it’s iPhone 11 or older), or your carrier hasn’t enabled 5G for your line. Check your iPhone model in Settings > General > About, and contact your carrier to confirm 5G is on your plan.
Does 5G use more battery than LTE?
Yes, 5G can consume more battery, especially when the signal is weak or when you’re using “5G On.” That’s why “5G Auto” is the default—it switches to LTE when 5G isn’t needed, saving battery life.
Will 5G use more data?
5G itself doesn’t use more data, but because it’s faster, apps may load more content (like higher-resolution videos or images) before you notice. If you have a limited data plan, keep “Data Mode” set to “Standard” to reduce data usage.
What’s the difference between 5G Auto and 5G On?
5G Auto uses 5G only when it won’t significantly reduce battery life, and it also uses the “Standalone” 5G network when available for better coverage. 5G On forces 5G all the time, which can drain battery faster but ensures you always get 5G when it’s available.
Can I force 5G when it’s not showing?
No, you can’t force 5G if your carrier or coverage doesn’t support it. The option in Settings only controls whether your iPhone is allowed to use 5G, not whether the network is available. If you’re in a 5G area and it’s not showing, try the troubleshooting steps above.
Does 5G work with dual SIM?
Yes, but only one line can use 5G at a time. In Settings > Cellular > Cellular Data, select which line uses cellular data. That line will get 5G, while the other line will use LTE or 4G.
Related
General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.
More in this bed
- Hogwarts Legacy Microsoft Visual C Runtime Error Fix
- Set Up UPI Payments Through WhatsApp
- Pair Oppo Enco Earbuds with Android, iPhone & Windows
- Fix Administrator Account Disabled Error in Windows 11
- How to Play Kodi on Smart TV from PC
- Factory Reset on Samsung Galaxy: What It Erases