sodcalculator

10 Tech How-To

Wi-Fi Network Name & Password: How to Find or Change

Guide 10-54411 · Updated · Step by step

This guide shows you how to locate your current Wi-Fi network name (SSID) and password, and how to change them on your router. You’ll need access to your router’s settings page, which usually means knowing its IP address and admin login. The steps work for most home routers from common brands like Netgear, TP-Link, Linksys, and Asus.

What You’ll Need

  • A computer or phone connected to your Wi-Fi network (or an Ethernet cable plugged into the router).
  • The router’s IP address (often printed on a sticker on the router itself).
  • The router’s admin username and password (also often on the sticker; if not, try “admin” for both, or check your router’s manual).

Step-by-Step

  1. Find your router’s IP address. On Windows, open Command Prompt and type ipconfig – look for “Default Gateway.” On Mac, go to System Settings > Wi-Fi > Details > Router. On a phone, check your Wi-Fi network’s details (often under the “i” icon). Common addresses are 192.168.1.1, 192.168.0.1, or 192.168.1.254.
  2. Open your router’s admin page. Open a web browser, type the IP address into the address bar, and press Enter. You’ll see a login page.
  3. Log in. Enter the router’s admin username and password. If you never changed them, try “admin” for both, or “admin” for username and “password” for password. If those fail, check the sticker on the router or the manual.
  4. Find the Wi-Fi settings. Once logged in, look for a section named “Wireless,” “Wi-Fi,” “Wireless Settings,” or “Basic Setup.” It might be under a “Setup” or “Advanced” tab.
  5. Locate your current network name and password. In the Wi-Fi settings, you’ll see fields labeled “Network Name (SSID)” and “Password” (or “Pre-Shared Key” / “WPA Key”). The current values are displayed there.
  6. To change them: Simply type a new name and/or password into those fields. Use a strong password (at least 12 characters, mixing letters, numbers, and symbols).
  7. Save your changes. Click “Apply,” “Save,” or “OK.” The router may reboot – this is normal.
  8. Reconnect your devices. After the change, your Wi-Fi network will disappear and reappear with the new name. You’ll need to reconnect every device using the new password.

Common Mistakes

  • Confusing the router admin password with the Wi-Fi password. The admin password logs you into the router settings; the Wi-Fi password is what your devices use to connect. They are different.
  • Typing the IP address into a search engine instead of the browser’s address bar.
  • Using a weak Wi-Fi password. Avoid simple words or numbers like “12345678” – they’re easy to guess.
  • Forgetting to save changes. If you navigate away without clicking Apply/Save, nothing changes.
  • Not checking for a sticker. Many routers have the default login and Wi-Fi password printed on a label – check there first.

Tips

  • Write down your new Wi-Fi name and password and keep them somewhere safe, like a note in your phone.
  • Use a password manager to store the router admin password and the Wi-Fi password.
  • If you have a dual-band router (2.4GHz and 5GHz), you may have separate settings for each band. You can give them the same name and password for seamless roaming, or different names to choose which band to connect to.
  • After changing the Wi-Fi password, your devices will be disconnected. You’ll need to re-enter the new password on each one.
  • If you forget the router admin password, you can usually reset the router to factory defaults by holding the reset button (a small pinhole) for 10-15 seconds. This will also reset your Wi-Fi name and password to the defaults on the sticker.

Troubleshooting

  • Can’t access the router admin page? Make sure you’re connected to the network (either via Wi-Fi or Ethernet). Try a different browser. If the IP address doesn’t work, try another common one (192.168.0.1, 192.168.1.254). If all fail, check your router’s manual or the manufacturer’s website.
  • Forgot the admin password? As mentioned, performing a factory reset will restore the default login (usually “admin”/”admin” or as printed on the sticker). Note this erases all your custom settings.
  • After changing the Wi-Fi name, some devices can’t find the network. This is normal – they’re looking for the old name. Just scan for Wi-Fi networks and select the new one.
  • You changed the password but devices still connect with the old one? Some devices may have a “forget” option – go to the device’s Wi-Fi settings, forget the network, then reconnect with the new password.
  • The router page won’t load on your phone? Some phones have trouble with router admin pages. Try using a computer.

Frequently Asked Questions

What is the default Wi-Fi password for my router?

It’s usually printed on a sticker on the router itself, often labeled as “Network Key,” “WPA Key,” or “Wireless Password.” If not, check the manual or the manufacturer’s website.

Can I change the Wi-Fi name and password without logging into the router?

No, you must access the router’s settings page. There’s no other way to change the network name or password.

Why can’t I find my router’s IP address?

On Windows, run ipconfig in Command Prompt and look for “Default Gateway.” On Mac, go to System Settings > Wi-Fi > Details > Router. If you still can’t find it, try the common addresses listed above, or check the router’s sticker.

What’s the difference between the Wi-Fi password and the router admin password?

The Wi-Fi password (also called the network key) is what you enter on your devices to connect to your wireless network. The router admin password is what you use to log into the router’s settings page to make changes like changing the Wi-Fi password.

Will changing my Wi-Fi password disconnect all my devices?

Yes, every device that is currently connected to your Wi-Fi will be disconnected. You’ll need to re-enter the new password on each device.

What should I do if I forgot my router admin password?

You can reset the router to factory defaults by holding the reset button (usually a small pinhole on the back) for about 10-15 seconds. This will restore the default admin username and password (often “admin”/”admin” or as printed on the sticker), but it will also erase any custom settings you’ve made.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →