Windows Backup errors 0x807800c5 and 0x8078004f usually appear when a backup fails due to disk space, file corruption, or permission problems. The quickest fix is to free up space on the destination drive, run a disk check, and reset the backup settings. Below are the exact steps to resolve both errors, plus background on why they occur and how to prevent them.
What These Errors Mean
Both error codes come from Windows Backup and Restore (Windows 7 feature still present in Windows 10 and 11). The codes are generic – they don’t point to one specific cause but to a failure in the backup process. In practice, they are most often triggered by:
- Insufficient free space on the backup destination (external drive, network share, or secondary partition).
- Corrupted system files or a damaged backup catalog.
- Permission issues on the destination folder.
- Conflicts with third-party backup software or antivirus.
Neither error indicates a hardware failure by itself, but they can occur if the destination drive has bad sectors or is disconnected during the backup.
Quick Fix: Free Up Space and Run Disk Check
Start with the most common cause – not enough room. Windows Backup needs roughly 10–15% of the drive’s capacity as overhead. If you’re backing up to an external drive, delete old backups or move files off it. Then run a disk check on both the source and destination drives:
- Open Command Prompt as administrator (search “cmd”, right-click, “Run as administrator”).
- Type
chkdsk C: /f(replace C: with your system drive) and press Enter. If it asks to schedule on reboot, type Y and restart. - Repeat for the destination drive, e.g.,
chkdsk E: /f. - After the check, try the backup again.
If the disk check finds and fixes errors, that often resolves the issue. If not, proceed to the next steps.
Reset Windows Backup Settings
Sometimes the backup catalog (a database of what’s been backed up) gets corrupted. Resetting it forces Windows to start fresh:
- Open Control Panel > “Backup and Restore (Windows 7)”.
- Click “Turn off schedule” (if active) and then “Delete backup” (this removes the backup set, not your personal files).
- Alternatively, open File Explorer, navigate to the destination drive, and delete the “WindowsImageBackup” folder. This is a hidden folder – you may need to enable “Hidden items” in the View tab.
- Go back to Backup and Restore, click “Set up backup”, and choose a fresh destination.
This clears any corrupted catalog. Note: deleting the backup set means you lose previous backups, so only do this if you don’t need them.
Check Permissions and Drive Format
If the destination drive is formatted with FAT32, Windows Backup may fail on large files. The drive should be NTFS. To check, right-click the drive in File Explorer, select “Properties”, and look at the “File system” line. If it’s FAT32, you’ll need to reformat (which erases data) or use a different drive.
Also, ensure the user account has full control over the destination folder:
- Right-click the destination drive or folder, choose “Properties”.
- Go to “Security” tab, click “Edit”, and select your user account.
- Check “Full control” and apply.
Run System File Checker
Corrupted system files can also cause backup errors. Run the System File Checker (SFC) to repair them:
- Open Command Prompt as administrator.
- Type
sfc /scannowand press Enter. This may take 15–20 minutes. - If it finds issues but can’t fix them, run
DISM /Online /Cleanup-Image /RestoreHealthand then repeat SFC.
Disable Conflicting Software Temporarily
Antivirus or third-party backup tools can interfere with Windows Backup. Temporarily disable your antivirus (not Windows Defender) and any other backup utility, then try again. If the backup succeeds, add exclusions for the backup destination folder in your antivirus settings.
Frequently Asked Questions
Will I lose my files if I delete the backup set?
No, deleting the backup set only removes the backup copies. Your original files on the system drive remain untouched. You’ll lose the ability to restore from that backup, but you can create a new one.
Can I use a network drive as the backup destination?
Yes, Windows Backup supports network locations. However, the drive must be accessible and have enough space. Network backups are slower and more prone to timeouts, which can trigger error 0x807800c5. If possible, use a locally attached drive.
Why does the error appear after a Windows update?
Windows updates can change permissions or introduce bugs. Running SFC and resetting the backup catalog usually fixes it. Also, ensure the destination drive is still connected and recognized after the update.
Is there a way to backup to a different drive without starting over?
Yes, you can change the backup destination in “Backup and Restore” without deleting existing backups. Click “Change settings” and then “Change backup settings”. Windows will keep the old backup until the new one is created.
What if the error still occurs after all these steps?
If the problem persists, try creating a system image instead of a file backup, or use File History for personal files. You can also consider third-party backup software, but ensure it’s compatible with your Windows version.
Related
General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.
More in this bed
- How to View Wi-Fi Password on iPhone
- How to Stream on Twitch from PC
- GTM vs Facebook Pixel: What’s the Difference?
- Windows 10 Won’t Boot? Fix It in 30 Minutes
- Ubuntu 26.04 LTS Requirements & Hardware Checks
- Zelle Error A101: What It Means & How to Fix It