sodcalculator

10 Tech How-To

Fix iPhone Attempting Data Recovery Loop

Guide 10-56668 · Updated · Step by step

If your iPhone is stuck on the “Attempting Data Recovery” screen, it usually means the device’s storage or system software has encountered an error, and the phone is trying to repair itself. The fix typically involves forcing a restart, updating or restoring the iPhone via a computer, or using recovery mode if the loop persists.

What Does “Attempting Data Recovery” Mean?

This screen appears when iOS detects a problem with the system files or the flash storage during startup. It’s a built-in recovery mechanism that attempts to repair the operating system without erasing your data. The message can show for a few minutes or indefinitely, depending on the severity of the issue. It is not the same as “Recovery Mode,” which is a manual troubleshooting state you enter with button combinations.

Why Does This Happen?

Several factors can trigger this loop:

  • Software glitches – A failed iOS update or restore can leave the system in an inconsistent state.
  • Storage corruption – Bad sectors or file system errors on the internal SSD can prevent normal booting.
  • Hardware issues – Physical damage or a failing storage chip can cause repeated recovery attempts.
  • Interrupted restore – Unplugging the iPhone during a restore or update can corrupt the boot process.
  • Low storage space – In rare cases, a completely full drive can cause boot problems.

Step-by-Step Fixes

Try these solutions in order, from least to most invasive. Each step builds on the previous one, so don’t skip ahead unless you’ve confirmed the earlier fix didn’t work.

1. Force Restart

A force restart clears temporary system state without erasing data. It’s the first thing to try because it’s quick and safe.

  1. Press and quickly release the Volume Up button.
  2. Press and quickly release the Volume Down button.
  3. Press and hold the Side button (right edge) until the Apple logo appears, then release.

If the “Attempting Data Recovery” screen reappears after the restart, move to the next step.

2. Put iPhone in Recovery Mode and Update

Recovery mode lets you reinstall iOS while keeping your data. This is different from a full restore, which erases everything.

  1. Connect your iPhone to a computer with the latest version of iTunes (Windows) or Finder (macOS Catalina or later).
  2. Force restart your iPhone using the same button sequence as above, but keep holding the Side button even after the Apple logo appears.
  3. Release the Side button when you see the “Connect to Computer” screen (a cable and laptop icon).
  4. On your computer, a dialog will appear. Choose Update (not Restore). This downloads iOS and tries to reinstall it without erasing your data.

If the update succeeds, your iPhone will restart normally. If it fails or gets stuck again, you may need to restore.

3. Restore (Erases Data)

Restoring wipes your iPhone and installs a fresh copy of iOS. Only do this if you have a backup (iCloud or computer). If you don’t have a backup, your data may be lost permanently.

  1. Put your iPhone in recovery mode as described above.
  2. On your computer, choose Restore instead of Update.
  3. Follow the prompts. The process can take 10–20 minutes.

After the restore, set up your iPhone as new or restore from a backup.

4. Use DFU Mode (Last Resort)

Device Firmware Update (DFU) mode bypasses the bootloader and allows a deeper restore. Use this only if recovery mode doesn’t work.

  1. Connect to a computer.
  2. Press and hold the Side button and Volume Down button together for 5 seconds.
  3. Release the Side button but keep holding Volume Down for 10 more seconds.
  4. If the screen stays black, you’re in DFU mode. If the Apple logo appears, repeat the process.
  5. Your computer should detect the iPhone in recovery mode. Choose Restore.

If DFU mode doesn’t work either, the issue is likely hardware-related.

What to Do If Nothing Works

If your iPhone still shows “Attempting Data Recovery” after trying all the above, the problem may be physical. Common causes include a damaged NAND flash chip, a faulty logic board, or water damage. In this case, you should:

  • Contact Apple Support or visit an Apple Store for diagnostics.
  • Consider a third-party repair shop that specializes in micro-soldering (if out of warranty).
  • Do not attempt to open the device yourself unless you have experience – you could cause further damage.

How to Prevent This in the Future

While not all causes are avoidable, you can reduce the risk:

  • Always back up your iPhone regularly (iCloud or computer).
  • Keep iOS up to date, but install updates when you have a stable connection and enough battery (above 50%).
  • Avoid interrupting updates or restores.
  • Don’t fill your storage completely – leave at least 1–2 GB free.
  • Use a quality lightning cable and avoid physical damage.

Frequently Asked Questions

Will I lose my data if I update in recovery mode?

No, the Update option in recovery mode preserves your data. It reinstalls iOS without erasing your personal files. However, there’s always a small risk of data loss during any software repair, so a backup is recommended.

How long should I wait on the “Attempting Data Recovery” screen?

It can take anywhere from a few minutes to over an hour. If it’s been more than 2 hours with no progress, the process is likely stuck. Force restart and try the recovery mode update.

Can I fix this without a computer?

If a force restart doesn’t work, you’ll need a computer to run recovery mode or DFU mode. There’s no way to reinstall iOS directly from the iPhone itself. If you don’t have a computer, you can try an Apple Store appointment.

What’s the difference between recovery mode and DFU mode?

Recovery mode loads a minimal iOS environment that allows you to update or restore. DFU mode is a deeper state that doesn’t load the operating system at all, which can fix more severe boot issues. DFU is riskier and should only be used when recovery mode fails.

Does this mean my iPhone is permanently broken?

Not necessarily. Software issues are the most common cause and are fixable with the steps above. If the problem persists after a DFU restore, it’s likely hardware, but that’s not always permanent – a professional repair may be possible.

Can I recover data from a phone stuck in this loop?

If you have a backup, yes – you can restore it after fixing the phone. If you don’t have a backup, the Update option in recovery mode may preserve your data. If that fails, professional data recovery services might be able to extract data directly from the storage chip, but this is expensive and not guaranteed.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →