sodcalculator

10 Tech How-To

Fix TPM Not Detected in Windows 11

Guide 10-44661 · Updated · Step by step

If Windows 11 says TPM not detected, the fix is usually to enable the TPM (Trusted Platform Module) in your BIOS/UEFI settings, update your BIOS, or change the TPM state from “Discrete” to “Firmware”. This article walks through the exact steps and explains why the error appears in the first place.

What Is TPM and Why Windows 11 Needs It

TPM (Trusted Platform Module) is a secure cryptoprocessor that stores encryption keys, passwords, and digital certificates. Windows 11 requires TPM version 2.0 as a minimum hardware requirement because it powers features like BitLocker encryption, Windows Hello, and Secure Boot. Without it, the OS refuses to install or upgrade. The error “TPM not detected” typically appears during the Windows 11 installation or when running the PC Health Check app.

There are two common types of TPM:

  • Discrete TPM – a separate chip soldered onto the motherboard (often labeled “TPM Header” or “TPM Module”).
  • Firmware TPM (fTPM) – a built-in security feature inside the CPU itself, enabled in BIOS. Most modern AMD and Intel CPUs support it.

If your PC was built in the last 5–7 years, it almost certainly has firmware TPM. The problem is that many motherboards ship with it disabled by default.

How to Check If Your PC Has TPM (Before You Enter BIOS)

Before changing BIOS settings, confirm whether Windows can see your TPM at all. Here’s how:

  1. Press Win + R, type tpm.msc, and press Enter.
  2. In the TPM Management window, look under “Status”. If it says “Compatible TPM cannot be found”, then Windows doesn’t detect it.
  3. Alternatively, open Device Manager → Security devices. If you see “Trusted Platform Module 2.0”, it’s present.
  4. Run the PC Health Check app from Microsoft – it will list TPM as a failed requirement if missing.

If TPM shows as present but Windows still says not detected, the issue is usually a BIOS setting, a pending firmware update, or a conflict with Secure Boot.

How to Enable TPM in BIOS/UEFI (Step-by-Step)

The exact menu names vary by motherboard brand, but the process is similar across all systems. You’ll need to restart your PC and enter the BIOS setup.

  1. Restart your PC and press the BIOS key repeatedly during boot (common keys: Del, F2, F10, or Esc). The key is usually shown on the first screen.
  2. Look for a section named Security, Trusted Computing, or Advanced.
  3. Find the TPM option. It may be called:
    • Intel PTT (on Intel motherboards)
    • AMD fTPM (on AMD systems)
    • TPM Device, TPM State, or Security Chip
  4. Set it to Enabled (or Firmware TPM if you see that option).
  5. If you see a choice between Discrete and Firmware, choose Firmware unless you have a physical TPM module installed.
  6. Save changes and exit (usually F10). Your PC will reboot.

After booting, run tpm.msc again. It should now show “The TPM is ready for use” with a specification version of 2.0.

Common Problems and Their Solutions

Sometimes enabling TPM isn’t enough. Here are the most frequent issues and how to resolve them:

  • TPM option is missing from BIOS – Your BIOS may be outdated. Check your motherboard manufacturer’s website for a BIOS update that adds TPM support (especially for Intel 8th-gen or AMD Ryzen 2000 series CPUs).
  • TPM is enabled but Windows still says not detected – Try clearing the TPM from BIOS (look for “Clear TPM” or “Reset TPM”). This resets the security chip and forces Windows to reinitialize it.
  • Secure Boot is disabled – Windows 11 also requires Secure Boot. In BIOS, find Boot → Secure Boot and set it to Enabled (or Windows UEFI mode).
  • BIOS is in Legacy/CSM mode – TPM often doesn’t work in legacy mode. Switch the boot mode to UEFI (not CSM) in BIOS.
  • Multiple TPM devices – Some motherboards have both a discrete TPM header and firmware TPM. If you have a physical module installed, make sure the BIOS is set to use it, not the firmware.

If you’ve tried all these and still get the error, your CPU or motherboard may genuinely lack TPM 2.0 support. Check the official Windows 11 compatibility list for your processor model.

What to Do If Your PC Doesn’t Support TPM 2.0

If your hardware is older than roughly 2016–2018, it may not have TPM 2.0 at all. In that case, you have three options:

  • Install a discrete TPM module – Many motherboards have a TPM header (usually a 14-pin or 20-pin connector). You can buy a compatible TPM 2.0 module online, but make sure it matches your motherboard model.
  • Upgrade your CPU/motherboard – The most reliable long-term solution, but also the most expensive.
  • Bypass the TPM check – Microsoft allows installing Windows 11 on unsupported hardware via a registry hack, but this is not recommended because you won’t receive security updates and the system may be unstable. This is not a supported path and should only be attempted by advanced users who understand the risks.

Note that some older CPUs (like Intel 7th-gen and AMD Ryzen 1000 series) do have firmware TPM, but Microsoft didn’t include them on the official supported list. In practice, they often work fine with Windows 11, but you may need to use the registry bypass.

How to Verify TPM Is Working After the Fix

Once you’ve enabled TPM and rebooted, verify it’s active:

  1. Press Win + R, type tpm.msc, and press Enter.
  2. The status should read “The TPM is ready for use”.
  3. Check the “Specification version” – it must be 2.0.
  4. If you see “TPM is not ready” or “TPM is off”, go back to BIOS and look for a “Clear TPM” option, then repeat the process.

You can also run the PC Health Check app again – it should now show a green checkmark for TPM and Secure Boot.

Frequently Asked Questions

Why does Windows 11 say TPM not detected even though I have a TPM?

Most often, the TPM is simply disabled in BIOS. Even if your CPU supports firmware TPM, the motherboard may have it turned off by default. Enabling it in the BIOS (as described above) usually solves the issue.

What is the difference between Intel PTT and AMD fTPM?

Both are firmware-based TPM implementations built into the CPU. Intel PTT (Platform Trust Technology) is found on Intel CPUs, and AMD fTPM (firmware TPM) is on AMD CPUs. They work the same way and both meet Windows 11’s TPM 2.0 requirement.

Can I install Windows 11 without TPM?

Officially, no. Microsoft requires TPM 2.0 for a standard installation. However, there are unofficial methods to bypass the check, but they come with risks like missing security updates and potential system instability. It’s not recommended for everyday users.

Does enabling TPM slow down my PC?

No. TPM is a dedicated security processor that works in the background. It may add a few milliseconds to encryption/decryption tasks, but you won’t notice any difference in daily use. It’s a required feature for Windows 11, not a performance drain.

What if my BIOS doesn’t have a TPM option at all?

If your BIOS is up to date and there’s no TPM, Trusted Computing, or fTPM/PTT option, your motherboard likely doesn’t support it. Check the manufacturer’s website for a BIOS update that might add the feature. If none exists, your only hardware options are a discrete TPM module or a new motherboard/CPU.

Will clearing TPM delete my files?

Clearing the TPM resets the security keys stored in the chip. It does not delete your personal files, but it may affect BitLocker encryption (you’ll need your recovery key) and Windows Hello (you’ll need to set up PIN/fingerprint again). Always back up your BitLocker recovery key before clearing TPM.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →