This guide walks you through fixing the “No internet, secured” error in Windows, where your device connects to the WiFi network but cannot actually reach the internet. This issue is common across Windows 10 and 11 and is usually caused by a stale network configuration, a faulty DNS setting, or a temporary glitch in the network stack. You’ll find step-by-step fixes below, starting with the quickest and safest methods.
What You’ll Need
- Administrator access to your Windows PC (to run certain commands).
- Your WiFi network name and password (in case you need to reconnect).
- A few minutes of patience—some fixes require a restart.
Step-by-Step
- Restart your modem and router. Unplug the power from both the modem and the router. Wait 30 seconds, plug the modem back in, wait for it to fully boot (lights stabilize), then plug in the router. Once both are online, disconnect and reconnect your PC to the WiFi network and check if the error persists.
- Forget and reconnect to the network. Click the WiFi icon in the system tray, select Network & Internet settings (or Network settings), then choose Manage known networks. Find your network, click Forget. Now reconnect by clicking the WiFi icon, selecting your network, entering the password, and connecting.
- Run the built-in network troubleshooter. Go to Settings > System > Troubleshoot > Other troubleshooters (Windows 11) or Settings > Update & Security > Troubleshoot > Additional troubleshooters (Windows 10). Select Internet Connections and run it. Follow the prompts; it may automatically reset your network adapter.
- Release and renew your IP address. Press Windows + R, type
cmd, right-click Command Prompt and select Run as administrator. In the window, type the following commands one by one, pressing Enter after each:ipconfig /releaseipconfig /renewipconfig /flushdns
Close the window and test your connection. - Reset the Winsock catalog and TCP/IP stack. In the same administrator Command Prompt, run these commands:
netsh winsock resetnetsh int ip reset
Restart your PC. This clears corrupted network settings that often cause the “No internet, secured” error. - Change your DNS server to a public one. Sometimes your ISP’s DNS is the problem. Go to Control Panel > Network and Sharing Center > Change adapter settings. Right-click your WiFi adapter, select Properties. Select Internet Protocol Version 4 (TCP/IPv4) and click Properties. Choose Use the following DNS server addresses and enter:
Preferred:8.8.8.8
Alternate:8.8.4.4
Click OK, then test your connection. - Disable and re-enable the WiFi adapter. Open Device Manager (right-click the Start button). Expand Network adapters, right-click your WiFi adapter, and select Disable device. Wait 10 seconds, then right-click again and select Enable device. Reconnect to your network.
- Update your WiFi driver. In Device Manager, right-click your WiFi adapter and select Update driver. Choose Search automatically for drivers. If Windows finds nothing, visit your laptop or adapter manufacturer’s website, download the latest driver, and install it. Restart afterward.
- Run a full network reset (Windows 10/11). Go to Settings > Network & Internet > Advanced network settings > Network reset (Windows 11) or Settings > Network & Internet > Status > Network reset (Windows 10). Click Reset now. This removes all network adapters and reinstall them, and resets all network settings to default. You’ll need to reconnect to WiFi afterward.
Common Mistakes
- Skipping the router restart. Many users jump straight to software fixes when the problem is a router that has been up for weeks. Always start with a full power cycle.
- Running commands without administrator rights. The
netshandipconfigcommands will fail or do nothing if you don’t open Command Prompt as administrator. - Forgetting to reconnect after a network reset. A network reset wipes saved WiFi passwords, so be ready to enter them again.
- Changing DNS but not flushing the cache. If you change DNS servers, run
ipconfig /flushdnsafterward; otherwise, old DNS entries may still be used.
Tips
- If you have a VPN or proxy enabled, temporarily disable it. VPNs can interfere with normal internet detection and cause this exact error.
- Check if other devices on the same WiFi have internet. If they don’t, the issue is with your router or ISP, not your PC.
- Keep your Windows OS updated. Microsoft regularly patches network-related bugs that can cause connectivity errors.
- If you’re using a laptop, try toggling Airplane mode on and off—it resets the radio without a full reboot.
Troubleshooting
If you’ve tried the steps above and still see “No internet, secured,” try these additional checks:
- Check the physical connection. If you’re using a desktop with a USB WiFi adapter, try a different USB port or a different adapter. For laptops, ensure the wireless switch (if any) is on.
- Boot into Safe Mode with Networking. Restart your PC, press F8 (or Shift + Restart) and choose Safe Mode with Networking. If the internet works there, a third-party app or service is blocking it. Use msconfig to disable startup items one by one.
- Check the Windows Time service. An incorrect system clock can break HTTPS connections, which may show as “No internet.” Right-click the clock, select Adjust date/time, and ensure Set time automatically is on.
- Try a different WiFi band. If your router broadcasts both 2.4 GHz and 5 GHz, connect to the other one. Sometimes one band has interference while the other works fine.
- Contact your ISP. If you’ve done a network reset and still have no internet, the problem may be on your ISP’s side. Call them and ask if there’s an outage in your area.
Frequently Asked Questions
Q: Why does Windows say “secured” but no internet?
A: “Secured” means your PC has successfully authenticated to the WiFi network with the correct password. The lack of internet is usually a separate issue—such as no IP address, DNS failure, or the router not having a working WAN connection.
Q: Will a network reset delete my files?
A: No. A network reset only removes network adapters and resets network settings to defaults. It does not touch your personal files, documents, or installed programs.
Q: How often does this error happen?
A: It’s fairly common, especially after Windows updates, router firmware updates, or power outages. It’s usually a temporary glitch that resolves with a restart or a settings refresh.
Q: Can I fix this without admin rights?
A: Some steps, like restarting the router or forgetting the network, don’t require admin. But the command-line fixes and driver updates do. If you don’t have admin rights, contact your system administrator.
Q: Is it safe to change my DNS to 8.8.8.8?
A: Yes. 8.8.8.8 is Google’s public DNS server—it’s free, widely used, and generally faster and more reliable than ISP-provided DNS. You can always revert to automatic DNS later.
Q: What if the error only happens on one device?
A: If other devices work fine, the problem is specific to that PC. Focus on the Windows-side fixes: flush DNS, reset Winsock, update drivers, and finally a network reset.
Related
General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.
More in this bed
- Hard Drive Very Slow Suddenly? Fixes That Work
- Windows Insider: Check New Windows 10 Features
- Restore Pitted Chrome Sink Drain Surrounds
- Error Performing Query Error Facebook: Fixes
- WiFi Not Working on HTC 10? Solved
- Fix Windows 100% CPU Usage: 7 Real Fixes