sodcalculator

10 Tech How-To

iPhone Flashlight Not Working? Fix It Now

Guide 10-56446 · Updated · Step by step

If your iPhone or iPad flashlight won’t turn on or is grayed out, the fix is usually a quick settings check, a forced restart, or clearing the Camera app from the app switcher. This guide walks through the most common causes and step-by-step fixes that resolve the issue for most users.

Why the Flashlight Stops Working

The flashlight on an iPhone or iPad is not a separate physical switch—it’s the LED camera flash controlled by software. When it stops working, the cause is almost always software-related rather than a hardware failure. Common triggers include:

  • The Camera app is using the flash (e.g., during a photo or video recording).
  • A control-center glitch left the toggle in a stuck state.
  • The device is in Low Power Mode, which can disable some background functions.
  • An app has taken control of the camera and hasn’t released it properly.
  • The flashlight toggle is grayed out because the camera is in use by another app.

Hardware issues (like a broken LED) are less common and usually follow a drop or water exposure.

Quick Fixes to Try First

Start with the simplest solutions—they resolve the majority of cases.

  1. Toggle the flashlight in Control Center: Swipe down from the top-right corner (iPhone X and later) or swipe up from the bottom (iPhone SE, 8 and earlier). Tap the flashlight icon to turn it off, wait a second, then tap it on again.
  2. Close the Camera app: Swipe up from the bottom (or double-click the Home button on older models) to open the app switcher, then swipe the Camera app away. This releases the flash hardware.
  3. Turn off Low Power Mode: Go to Settings > Battery and toggle off Low Power Mode. Some users report the flashlight becomes unresponsive while this mode is active.
  4. Restart your iPhone: Press and hold the side button and either volume button until the power off slider appears. Drag to power off, wait 30 seconds, then power back on.

If the flashlight still doesn’t respond, move to the next section.

Force Restart and Settings Reset

A force restart clears deeper software glitches without erasing your data. The steps differ by model:

  • iPhone 8 or later: Press and quickly release the Volume Up button, then Volume Down, then press and hold the Side button until the Apple logo appears.
  • iPhone 7/7 Plus: Press and hold both the Side and Volume Down buttons until the Apple logo appears.
  • iPhone 6s and earlier, iPad with Home button: Press and hold both the Home and Top (or Side) buttons until the Apple logo appears.

If that doesn’t help, reset all settings: Settings > General > Transfer or Reset iPhone > Reset > Reset All Settings. This restores system preferences (like Wi-Fi passwords and wallpaper) to defaults but doesn’t delete your photos, apps, or data.

Check for App Interference

Some apps—especially those using the camera (QR scanners, video callers, social media)—can hold the flash in a busy state. If the flashlight icon in Control Center is grayed out, an app is likely using the camera.

  1. Close all apps in the app switcher.
  2. Open Control Center and try the flashlight again.
  3. If it works, reopen apps one by one to find the culprit.
  4. Delete any recently installed flashlight or camera utility apps, as they may conflict with the system function.

When It’s a Hardware Problem

If the software fixes don’t work, the LED may be physically damaged. Signs include:

  • The flashlight never worked after a drop or water exposure.
  • The rear camera flash doesn’t fire in photo mode either.
  • The flashlight icon is present and toggles, but no light emits.

In these cases, try a different camera app (like the built-in Camera) to see if the flash fires during a photo. If it doesn’t, the LED or its connection is likely faulty. Contact Apple Support or visit an authorized service provider for a diagnostic. Out-of-warranty repairs typically cost more than a new device, so weigh the options.

iPad-Specific Notes

Most iPads do not have a built-in flashlight—the LED is only used for the camera flash. The Control Center flashlight icon appears only on iPads with a True Tone flash (iPad Pro 12.9-inch 5th generation and later, iPad Pro 11-inch 3rd generation and later). If you have an older iPad, the flashlight icon won’t be there at all. If it is there but not working, follow the same steps as for iPhone.

Frequently Asked Questions

Why is my flashlight grayed out on iPhone?

A grayed-out flashlight icon means the camera is currently in use by an app. Close all apps, especially the Camera app, and try again. If it remains grayed out after closing everything, restart your iPhone.

Can I use my iPhone flashlight while charging?

Yes, the flashlight works normally while charging. If it doesn’t, try a different charger or cable, as some third-party accessories can interfere with the device’s power management.

Does Low Power Mode disable the flashlight?

Not directly, but it can cause the flashlight to behave oddly in some iOS versions. Turning off Low Power Mode is a common fix.

Will resetting all settings delete my photos?

No. Reset All Settings only resets system preferences like Wi-Fi passwords, Bluetooth pairings, and wallpaper. It does not delete photos, messages, or apps.

My flashlight turns on but is very dim. What should I do?

A dim flashlight usually indicates a weak battery or a software issue. Charge your device to at least 20% and restart it. If the problem persists, the LED may be failing and need service.

Can I turn on the flashlight from the lock screen?

Yes, on iPhones with Face ID, press and hold the flashlight icon on the lock screen. On Touch ID models, swipe up to access Control Center and tap the flashlight icon.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →